Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch; Air Bag Clockspring.; Multifunction Switch; Switch Housing; Ignition Housing; Clockspring; Switch Multifunction
Replaces: 56045515AA, 56049823AA, 56045165AB
Item Weight: 1.00 Pounds
Item Dimensions: 4.0 x 5.6 x 11.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 56049823AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10
2009 Dodge Ram 3500 Headlight Switch Parts and Q&A
Q: How to Install a Headlight Switch on 2009 Dodge Ram 3500?
A: Before installing the headlamp switch, isolate the battery ground cable, wait two minutes and deactivate the Supplemental Restraint System to protect yourself from accidental air bag deployment. Set the headlamp switch at the rear of the bezel in the instrument cluster. Secure the headlamp switch to the cluster bezel with three screws tightened to 2 Nm or 20 in. lbs. Bring the cluster bezel near the dash and then link the wire harness connector to the backside of the headlighth up switch assembly. After that, apply the cluster bezel to the dash and attach the negative side of the battery cable.