How to Service and Repair a Steering Knuckle on 2009 Dodge Ram 3500?

To work on the steering knuckle, first lift the car and put it on jack stands and then remove the wheel and tire. Afterwards, you should unsure the brake caliper, rotor, shield and ABS wheel speed sensor from the wheel, if one is installed. Take out the nut from the tie rod end and use Remover 9360 to break the connection between the tie rod and knuckle. Take out the upper ball joint nut and use Remover 9360 to separate the ball joint from the knuckle, being sure not to damage the ball joint seal when working with puller 8677. Later, take out the lower ball joint nut and separate the ball joint from the knuckle using puller 8677 and finally remove the knuckle. In the end, take out the hub/bearing from the steering knuckle.

OEM 2009 Dodge Ram 3500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Knuckles found

View related parts
2009 Dodge Ram 3500 Knuckle, Front Passenger Side Part Number: 5086678AA
$398.90 MSRP: $896.00
You Save: $497.10 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Item Weight: 21.40 Pounds
- Item Dimensions: 14.7 x 14.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 3500 Knuckle, Front Driver Side Part Number: 68054495AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Item Weight: 24.90 Pounds
- Item Dimensions: 12.4 x 12.8 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68054495AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 3500 Knuckle, Front Driver Side Part Number: 5086679AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Item Weight: 21.00 Pounds
- Item Dimensions: 14.8 x 12.2 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086679AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 3500 Knuckle, Front Passenger Side Part Number: 68054494AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Item Weight: 23.30 Pounds
- Item Dimensions: 12.9 x 13.2 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68054494AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 3500 Knuckle, Front Passenger Side Part Number: 68032004AF
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right, Right; Knuckle Front
- Position: Front Passenger Side
- Replaces: 68032004AC, 68032004AA, 68032004AB, 68032004AD, 68032004AE
- Item Weight: 27.90 Pounds
- Item Dimensions: 16.9 x 12.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68032004AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT | 5.7L V8, 5.9L L6, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 3500 Knuckle, Front Driver Side Part Number: 68032003AF
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left, Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 68032003AC, 68032003AD, 68032003AE, 68032003AB, 68032003AA
- Item Weight: 29.20 Pounds
- Item Dimensions: 17.1 x 14.4 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68032003AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT | 5.7L V8, 5.9L L6, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS

2009 Dodge Ram 3500 Steering Knuckle Parts and Q&A

Q: How to Service and Repair a Steering Knuckle on 2009 Dodge Ram 3500?
A: To work on the steering knuckle, first lift the car and put it on jack stands and then remove the wheel and tire. Afterwards, you should unsure the brake caliper, rotor, shield and ABS wheel speed sensor from the wheel, if one is installed. Take out the nut from the tie rod end and use Remover 9360 to break the connection between the tie rod and knuckle. Take out the upper ball joint nut and use Remover 9360 to separate the ball joint from the knuckle, being sure not to damage the ball joint seal when working with puller 8677. Later, take out the lower ball joint nut and separate the ball joint from the knuckle using puller 8677 and finally remove the knuckle. In the end, take out the hub/bearing from the steering knuckle.