OEM 2009 Dodge Viper Vapor Canister

2009 Dodge Viper Vapor Canister Parts and Q&A

• Q: How to Service and Repair a Vapor Canister on 2009 Dodge Viper?

  A: To work on the Evaporative Emission Control Canister, first unhook the car's negative battery cable at the battery. Then, affix the panel over the opening you created and outline it onto the wheel. Be sure to mark the circle for the rivet. Remove the panel covering where the fuel tank will be; cut the fuel tank panel hole and fit the tank and then drill 17 additional holes. Unplug the LDP connecter from the pump and take out the liquid separator from the canister. Remove the lines from the LDP, take out the three screws on the pump and then pull out the EVAP canister. Make sure to cut the trunk panel to access the EVAP canister when you take it out.