How Is a Vapor Canister Installed on 2008 Dodge Viper?

Attach the pump bracket to the canister and tighten the screws to 1.2 Nm (10.6 in. lbs.). If any hoses that feed the LDP show cracks or splits, the Check Engine Light will come on. After that, link the lines to the LDP and mount the EVAP canister and liquid separator together on the canister. Slide the electrical connector onto the pump and hold the locking tab tight. Then, put on the access panel and re-attach the negative battery cable, tightening the nut to 90 inch-pounds (10 Nm). After that, examine the LDP function with the help of the scan tool.

OEM 2008 Dodge Viper Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vapor Canister found

View related parts
2008 Dodge Viper Vapor Canister Part Number: 53013096AB
$302.51 MSRP: $449.00
You Save: $146.49 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Item Weight: 2.60 Pounds
- Item Dimensions: 15.8 x 10.4 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013096AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2008 Dodge Viper Vapor Canister Parts and Q&A

Q: How Is a Vapor Canister Installed on 2008 Dodge Viper?
A: Attach the pump bracket to the canister and tighten the screws to 1.2 Nm (10.6 in. lbs.). If any hoses that feed the LDP show cracks or splits, the Check Engine Light will come on. After that, link the lines to the LDP and mount the EVAP canister and liquid separator together on the canister. Slide the electrical connector onto the pump and hold the locking tab tight. Then, put on the access panel and re-attach the negative battery cable, tightening the nut to 90 inch-pounds (10 Nm). After that, examine the LDP function with the help of the scan tool.