How to Remove the Vapor Canister on Dodge Viper?

The first step in removing the Evaporative Emission Control Canister is disconnecting and isolating the negative battery cable at the battery. After that, install the access panel and outline it with a scribe, showing where the rivet goes. Drill the fuel tank hole on the closeout panel, take out the panel and then drill 17 holes. Take out the LDP electrical connector from the pump, remove the liquid separator from the canister and separate the lines from the LDP. After that, unscrew the three fasteners on the pump and remove the EVAP canister. Please note that the trunk must be cut to help remove the EVAP canister.

How to Service and Repair a Vapor Canister on Dodge Viper?

For service and repair of an Evaporative Emission Control Canister, first raise the vehicle and secure it in place with support. Detach the negative cable from the battery and then get rid of the right rear wheel. Then, remove the panel found at the back of the wheel well. Separate the hoses from the EVAP canister and loosen just one bolt on the mounting bracket for the canister. Slide the canister away from the front to release it from the clip. To fit the EVAP canister, set it into place on the bracket and tighten the bolt up to 6.7 Nm (60 in. lbs.). Connect the hoses, put the rear wheel back on, reconnect the negative battery and then lower the whole vehicle.

OEM Dodge Viper Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Vapor Canisters found

View related parts
Dodge Viper Vapor Canister Part Number: 53013096AB
$302.51 MSRP: $449.00
You Save: $146.49 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017, 2008-2010, 2003-2006 Dodge Viper | ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Vapor Canister Part Number: 5264889AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Viper | ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Vapor Canister Part Number: 4723550
Product Specifications
- Other Name: Canister Package - Vapor; Canister, Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1995 Dodge Viper | Base | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Vapor Canister Part Number: 4669456
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Vapor Canister Part Number: 53030381AB
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Replaces: 4790695
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Dodge Viper | Base, GTS, R/T-10 | 10 Cyl 8.0 L GAS

Dodge Viper Vapor Canister

Choose OEM Vapor Canister that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Vapor Canister follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Vapor Canister is a vital part of the Dodge Viper EVAP system that controls the hooting escape of fuel vapor from the fuel tank, which has great market repute for its durability and efficiency. This canister also well known as the charcoal canister is very important in cutting short all chances of having free Hydrocarbon (HC) emission into the atmosphere. The Vapor Canister utilize activated charcoal to adsorb fuel vapors and the vapors are stored before and are ready to be burned effectively in the engine cylinder. Besides, it improves substantially not only the efficiency and the power of the Dodge Viper but also protects the environment. Used with different models of Viper, the Vapor Canister coordinates with the fuel tank and engines with a help of a purge valve for the vapor. Diagnostic elements of systems, for example, canister vent solenoids, and fuel tank pressure sensors, enable early pinpointing of any emission leakage, making the technology efficient. The Dodge Viper, a synonym for tough built appeals to a particular class of buyer base both domestically and in the global market with its charming ruggedness and raw power complemented by the Vapor Canister's efficiency. As a piece of auto engineering, the Vapor Canister brings out the fire and efficiency of the Dodge Viper as well as demonstrates the passion and corporate ecology of the Dodge Viper in a nutshell.

Dodge Viper Vapor Canister Parts and Q&A

Vapor Canister
53013096AB
Q: How to Remove the Vapor Canister on Dodge Viper?
A:
The first step in removing the Evaporative Emission Control Canister is disconnecting and isolating the negative Battery Cable at the battery. After that, install the access panel and outline it with a scribe, showing where the rivet goes. Drill the Fuel Tank hole on the closeout panel, take out the panel and then drill 17 holes. Take out the LDP electrical connector from the pump, remove the liquid separator from the canister and separate the lines from the LDP. After that, unscrew the three fasteners on the pump and remove the EVAP canister. Please note that the trunk must be cut to help remove the EVAP canister.
Vapor Canister
4669456
Q: How to Service and Repair a Vapor Canister on Dodge Viper?
A:
For service and repair of an Evaporative Emission Control Canister, first raise the vehicle and secure it in place with support. Detach the negative cable from the battery and then get rid of the right rear wheel. Then, remove the panel found at the back of the wheel well. Separate the hoses from the EVAP canister and loosen just one bolt on the mounting bracket for the canister. Slide the canister away from the front to release it from the clip. To fit the EVAP canister, set it into place on the bracket and tighten the bolt up to 6.7 Nm (60 in. lbs.). Connect the hoses, put the rear wheel back on, reconnect the negative battery and then lower the whole vehicle.