How to Service and Repair a Wiper Switch in a Multifunction Switch on 2009 Dodge Viper?

Before servicing or repairing the switch, open the deck lid, take out the four bolts holding the battery compartment cover and remove the cover. Get rid of the battery negative cable and then pull the top and bottom steering column shrouds. After that, unplug both posi-lock harness connectors at the back of the multi-function switch. Take out the screws holding the multi-function switch to your bike. You should transfer the old windshield wiper/washer switch function to the new multi-function switch which will ensure proper installation.

OEM 2009 Dodge Viper Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Switches found

View related parts
2009 Dodge Viper Headlamp Switch Part Number: 5066185AA
$112.34 MSRP: $150.00
You Save: $37.66 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Switch Multifunction
- Item Weight: 2.90 Pounds
- Item Dimensions: 12.7 x 5.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5066185AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Wiper Switch Part Number: 5019710AA
Product Specifications
- Other Name: Switch - Intermittent Wiper; Windshield Wiper Switch; Windshield Washer Switch; Front Wiper Switch; Switch Intermittent Wiper
- Replaces: 5016949AB
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.4 x 3.8 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019710AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- ACR, GTS, R/T-10, SRT-10, SRT-10 ACR | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2009 Dodge Viper Wiper Switch Parts and Q&A

Q: How to Service and Repair a Wiper Switch in a Multifunction Switch on 2009 Dodge Viper?
A: Before servicing or repairing the switch, open the deck lid, take out the four bolts holding the battery compartment cover and remove the cover. Get rid of the battery negative cable and then pull the top and bottom steering column shrouds. After that, unplug both posi-lock harness connectors at the back of the multi-function switch. Take out the screws holding the multi-function switch to your bike. You should transfer the old windshield wiper/washer switch function to the new multi-function switch which will ensure proper installation.