How to Service a Brake Light Switch on 2009 Dodge Viper?

First disconnect and isolate the battery negative cable from its post on the battery to service the brake light switch. Rotate the brake lamp switch in a counterclockwise rotational direction approximately 30 degrees and pull out from the bracket, underneath the instrument panel. Disconnect the wiring harness connector from the switch, then. Last of all, you can toss the brake lamp switch as it cannot be reused.

OEM 2009 Dodge Viper Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2009 Dodge Viper Switch Package - Stop Lamp Part Number: 5083344AB
Product Specifications
- Other Name: SW PKG-STOP LAMP
- SKU: 5083344AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.4L V10

2009 Dodge Viper Brake Light Switch Parts and Q&A

Q: How to Service a Brake Light Switch on 2009 Dodge Viper?
A: First disconnect and isolate the battery negative cable from its post on the battery to service the brake light switch. Rotate the brake lamp switch in a counterclockwise rotational direction approximately 30 degrees and pull out from the bracket, underneath the instrument panel. Disconnect the wiring harness connector from the switch, then. Last of all, you can toss the brake lamp switch as it cannot be reused.