How to Install a Fuel Level Sensor on 2009 Jeep Commander?

Make sure you connect the wire harness from the unit into the electrical connectors and into the pump module with the recorded pin locations in mind. After that, set the fuel level sensor onto the mounting tracks and ensure it snaps into place beside the pump module. After that, simply install the fuel pump module according to the appropriate manual or guide.

OEM 2009 Jeep Commander Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Level Sensor found

View related parts
2009 Jeep Commander Fuel Pump Gasket Part Number: 68304753AA
$32.23 MSRP: $47.75
You Save: $15.52 (33%)
ADD TO CART
Product Specifications
- Other Name: O Ring - Fuel Pump And Level Unit; Fuel Pump Tank Seal; Fuel Pump Seal; Fuel Pump Assembly Seal; Gasket Fuel Pump
- Replaces: 57009306AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.2 x 6.3 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68304753AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Fuel Level Sensor Parts and Q&A

Q: How to Install a Fuel Level Sensor on 2009 Jeep Commander?
A: Make sure you connect the wire harness from the unit into the electrical connectors and into the pump module with the recorded pin locations in mind. After that, set the fuel level sensor onto the mounting tracks and ensure it snaps into place beside the pump module. After that, simply install the fuel pump module according to the appropriate manual or guide.