How to Remove and Replace a Front Brake Caliper on 2009 Jeep Compass?

To start, press the brake pedal with a brake pedal holding tool, past the first 25 mm (1 inch), to disconnect the master cylinder from the brake system so brake fluid will not drain out while the lines are opened. After that, lift the vehicle, secure it and unscrew the wheel mounting nuts and remove the tire and wheel along with it. Remove the bolt that brings the brake flex hose to the brake caliper, taking off the two washers it brings with it. When removing the caliper guide pin bolts, notice that the upper one ends in a special sleeve, so it has to be put into the top mounting hole during reassembly. In the end, unscrew the two guide pin bolts for the brake caliper, move it off the disc brake adapter bracket and away from the pads and set it aside.

OEM 2009 Jeep Compass Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2009 Jeep Compass Caliper, Rear Passenger Side Part Number: 5191268AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 4.30 Pounds
- Item Dimensions: 9.5 x 7.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191268AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Compass Submodels:
- 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Jeep Compass Caliper, Front Driver Side Part Number: 5191239AA
$113.04 MSRP: $171.00
You Save: $57.96 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Driver Side
- Item Weight: 8.00 Pounds
- Item Dimensions: 9.5 x 7.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191239AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Compass Submodels:
- 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Jeep Compass Caliper, Rear Driver Side Part Number: 68020261AB
$125.07 MSRP: $188.00
You Save: $62.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.2 x 7.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020261AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Compass Submodels:
- 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Jeep Compass Caliper, Rear Driver Side Part Number: 5191267AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.00 Pounds
- Item Dimensions: 10.1 x 7.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191267AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Compass Submodels:
- 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Jeep Compass Caliper, Front Passenger Side Part Number: 5191238AA
$130.02 MSRP: $181.00
You Save: $50.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 8.10 Pounds
- Item Dimensions: 9.3 x 7.4 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191238AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Compass Submodels:
- 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Jeep Compass Caliper, Rear Passenger Side Part Number: 68020252AB
$108.84 MSRP: $145.00
You Save: $36.16 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Passenger Side
- Replaces: 68020252AA
- Item Weight: 4.10 Pounds
- Item Dimensions: 10.3 x 7.4 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020252AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Compass Submodels:
- 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Jeep Compass Brake Caliper Parts and Q&A

Q: How to Remove and Replace a Front Brake Caliper on 2009 Jeep Compass?
A: To start, press the brake pedal with a brake pedal holding tool, past the first 25 mm (1 inch), to disconnect the master cylinder from the brake system so brake fluid will not drain out while the lines are opened. After that, lift the vehicle, secure it and unscrew the wheel mounting nuts and remove the tire and wheel along with it. Remove the bolt that brings the brake flex hose to the brake caliper, taking off the two washers it brings with it. When removing the caliper guide pin bolts, notice that the upper one ends in a special sleeve, so it has to be put into the top mounting hole during reassembly. In the end, unscrew the two guide pin bolts for the brake caliper, move it off the disc brake adapter bracket and away from the pads and set it aside.