How to Install an Oil Filter for Your Engine on 2009 Jeep Wrangler?

First clean the oil filter adapter base and inspect the gasket contact surface. Lubricate the clean engine oil onto the gasket of the new filter, next. Tighten the filter 1 turn or to a torque of 20 Nm (15 ft. lbs.) after installing it to the base with the washer touching the base; you may need to use a filter wrench. Finally, start the engine and then check for leaks.

OEM 2009 Jeep Wrangler Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Filter found

View related parts
2009 Jeep Wrangler Oil Filter Part Number: 4105409AE
$7.96 MSRP: $12.00
You Save: $4.04 (34%)
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Filter
- Replaces: 4105409AB, 4105409BB, FE00215, 4105409AC, 4105409
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4105409AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, SE, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS

2009 Jeep Wrangler Oil Filter Parts and Q&A

Q: How to Install an Oil Filter for Your Engine on 2009 Jeep Wrangler?
A: First clean the oil filter adapter base and inspect the gasket contact surface. Lubricate the clean engine oil onto the gasket of the new filter, next. Tighten the filter 1 turn or to a torque of 20 Nm (15 ft. lbs.) after installing it to the base with the washer touching the base; you may need to use a filter wrench. Finally, start the engine and then check for leaks.