How to Maintain the Oil Pressure Switch for the Fuel Pump on 2009 Jeep Wrangler?

Raise the vehicle with a hoist before starting to work on the Oil Pressure Switch for the fuel pump. Then, unplug the electrical connector from the switch and after that, take out the oil pressure switch with part number 1.

OEM 2009 Jeep Wrangler Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2009 Jeep Wrangler Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, SE, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS

2009 Jeep Wrangler Oil Pressure Switch Parts and Q&A

Q: How to Maintain the Oil Pressure Switch for the Fuel Pump on 2009 Jeep Wrangler?
A: Raise the vehicle with a hoist before starting to work on the Oil Pressure Switch for the fuel pump. Then, unplug the electrical connector from the switch and after that, take out the oil pressure switch with part number 1.