How to Service and Repair a Dimmer Switch for Fog/Driving Lamps on 2009 Jeep Wrangler?

To start servicing or repairing the fog/driving lamp switch, first remove the negative cable from the battery, separate it and isolate it and wait for two minutes so the SRS capacitor discharges. Both upper and lower shrouds on the steering column must be taken off first. After that, remove the connector for the instrument panel wire harness from the left multi-function switch. Remove the screw holding the left multi-function switch to the left side of the Clock Spring. Slide the switch toward the end of the case to take the slide tabs out of the bracket. Remove the jumper wire harness connector from the inboard end on the left multi-function switch and then remove the switch from the Clock Spring.

OEM 2009 Jeep Wrangler Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Dimmer Switches found

View related parts
2009 Jeep Wrangler Turn Signal Switch Part Number: 68041485AD
$112.62 MSRP: $172.00
You Save: $59.38 (35%)
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Signal Switch; Switch Multifunction
- Replaces: 5183947AC, 68041485AA, 68041485AB, 5183947AA, 68041485AC, 5183947AB
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.4 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68041485AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2009 Jeep Wrangler Turn Signal Switch Part Number: 5183952AF
$44.94 MSRP: $66.60
You Save: $21.66 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5183952AA, 5183952AC, 5183952AB, 5183952AD, 5183952AE
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.9 x 4.5 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183952AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- Rubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2009 Jeep Wrangler Turn Signal Switch Part Number: 5183950AF
Product Specifications
- Other Name: Switch - Multifunction; Steering Column Switch Housing; Combination Switch; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch Multifunction
- Replaces: 5183950AE, 5183950AD, 5183950AC, 5183950AB, 5183950AA
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.4 x 5.4 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183950AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- Rubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2009 Jeep Wrangler Turn Signal Switch Part Number: 5183946AF
Product Specifications
- Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch Multifunction
- Replaces: 5183946AA, 5183946AD, 5183946AE, 5183946AB, 5183946AC
- Item Weight: 1.40 Pounds
- Item Dimensions: 9.2 x 3.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183946AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2009 Jeep Wrangler Dimmer Switch Parts and Q&A

Q: How to Service and Repair a Dimmer Switch for Fog/Driving Lamps on 2009 Jeep Wrangler?
A: To start servicing or repairing the fog/driving lamp switch, first remove the negative cable from the battery, separate it and isolate it and wait for two minutes so the SRS capacitor discharges. Both upper and lower shrouds on the steering column must be taken off first. After that, remove the connector for the instrument panel wire harness from the left multi-function switch. Remove the screw holding the left multi-function switch to the left side of the Clock Spring. Slide the switch toward the end of the case to take the slide tabs out of the bracket. Remove the jumper wire harness connector from the inboard end on the left multi-function switch and then remove the switch from the Clock Spring.