How to Remove the MAP Sensor from the Upper Intake Manifold on 2009 Jeep Wrangler?

The MAP sensor is found located in the rear of the upper intake manifold. Remove the electrical connector from the MAP sensor before you take it out. Then, make sure you remove any debris from the MAP sensor's base. After that, gently grab the MAP sensor and turn it counterclockwise a quarter turn to disconnect it. Be sure to examine the state of the sensor O-ring last.

OEM 2009 Jeep Wrangler MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2009 Jeep Wrangler M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS

2009 Jeep Wrangler MAP Sensor Parts and Q&A

Q: How to Remove the MAP Sensor from the Upper Intake Manifold on 2009 Jeep Wrangler?
A: The MAP sensor is found located in the rear of the upper intake manifold. Remove the electrical connector from the MAP sensor before you take it out. Then, make sure you remove any debris from the MAP sensor's base. After that, gently grab the MAP sensor and turn it counterclockwise a quarter turn to disconnect it. Be sure to examine the state of the sensor O-ring last.