OEM 2010 Chrysler PT Cruiser Harmonic Balancer

2010 Chrysler PT Cruiser Harmonic Balancer Parts and Q&A

• Q: How to Install a Harmonic Balancer Using the Crankshaft Damper/Sprocket Installer 6792 on 2010 Chrysler PT Cruiser?

  A: Use the Harmonic Balancer/Sprocket Installer 6792 and attach the harmonic balancer with an M12 1.75 x 150 mm bolt, washer, thrust bearing and nut. Before putting the balancer on, apply a layer of Mopar(R) Nickel Anti-seize Compound or a similar substance, to the M12 1.75 x 150 mm bolt thread. After installing, take out the Harmonic Balancer/Sprocket Installer 6792. After that, coat the harmonic balancer bolt with Lock AND Seal Adhesive (Medium Strength Threadlocker), then tighten it until 136 Nm (100 ft. lbs.) is reached. Now, put on the accessory drive belts according to the required service steps.