Other Name: Air Bag - Passenger; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Passenger
Position: Upper Passenger Side
Replaces: 52029340AI
Item Weight: 8.20 Pounds
Item Dimensions: 20.5 x 12.3 x 9.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52029340AJ
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
2010 Dodge Avenger Air Bag Parts and Q&A
Q: How to Safely Remove an Air Bag from the Side Curtain on 2010 Dodge Avenger?
A: To avoid serious injury, first remote the negative battery cable, then wait for two minutes after so the reserve capacitor can discharge before you open the side curtain air bag module. After that, remove or lower the panel over the roof to reach the curtain air bag. Lose the end of the squib connector from the back of the inflator. On both the A-pillar and C-pillar, loosen the front and back tethers. First, take out the seven nuts that are holding the air bag in place along the roof line, then raise the air bag off the studs and pull it out of the car.