How to Ensure Safety and Proper Functionality When Servicing an Air Bag Sensor on 2010 Dodge Caliber?

First, put the car in Park, turn off the car and disable the SRS by disconnecting the negative battery cable, avoiding bad injury by letting it sit for two minutes to drain the system. Striking or dropping the front impact sensor may harm it or change its calibration, so you need to change it if that happens to make sure the SRS works properly in front of your car. You can use the sensors from either the front or side impact sensors in any position. Open the bottle by taking out the screw that fastens the impact sensor onto the side radiator support vertical. Following that, take out the front impact sensor from the engine compartment by disconnecting the engine compartment wire harness connector from the sensor's receptacle.

OEM 2010 Dodge Caliber Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

View related parts
2010 Dodge Caliber Impact Sensor, Outer Part Number: 68056160AA
$158.62 MSRP: $234.00
You Save: $75.38 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer, Rear; Air Bag Sensor; Side Impact Sensor; Sensor for Side Airbag Impact and B/C Pillar.
- Position: Outer
- Replaces: 4896153AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.6 x 1.1 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68056160AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Air Bag Sensor, Rear Part Number: 68056162AA
$89.62 MSRP: $132.00
You Save: $42.38 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front, Side, B Pillar, and C Pillar Sensors.
- Position: Rear
- Replaces: 4896152AC
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.2 x 1.5 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 68056162AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Air Bag Sensor Parts and Q&A

Q: How to Ensure Safety and Proper Functionality When Servicing an Air Bag Sensor on 2010 Dodge Caliber?
A: First, put the car in Park, turn off the car and disable the SRS by disconnecting the negative battery cable, avoiding bad injury by letting it sit for two minutes to drain the system. Striking or dropping the front impact sensor may harm it or change its calibration, so you need to change it if that happens to make sure the SRS works properly in front of your car. You can use the sensors from either the front or side impact sensors in any position. Open the bottle by taking out the screw that fastens the impact sensor onto the side radiator support vertical. Following that, take out the front impact sensor from the engine compartment by disconnecting the engine compartment wire harness connector from the sensor's receptacle.