How to Properly Install an Air Bag Sensor in the Engine Compartment on Dodge Caliber?

Mount the left or right front impact sensor (3) into the engine compartment near its place and connect the harness connector (1) to the sensor. Then, set the sensor to the back of the radiator hanger vertical member, whose lower hole fits over the anti-rotation pin pressed to the back of the sensor. Screw and tighten (4) the middle vertical support screw to a torque of 8 Nm (71 in. lbs.) which will secure the sensor (3) to the back of the support vertical member (2). Connecting the negative cable before the system test could result in personal injury or death, so it should never be done before then.

How to Service an Air Bag Sensor for Front Impact on Dodge Caliber?

Before doing anything on the front impact sensor, break the connection of the negative battery wire and wait for two minutes to let the system reserve capacitor discharge. After that, get rid of the screw that holds the front impact sensor in place on the lower right or left radiator support vertical member. Remove the connector from the sensor and after that, uninstall the right or left front impact sensor from the engine compartment.

OEM Dodge Caliber Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bag Sensors found

View related parts
Dodge Caliber Impact Sensor, Outer Part Number: 68056160AA
$158.62 MSRP: $234.00
You Save: $75.38 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer, Rear; Air Bag Sensor; Side Impact Sensor; Sensor for Side Airbag Impact and B/C Pillar.
- Position: Outer
- Replaces: 4896153AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Air Bag Sensor, Front Part Number: 4896061AB
$75.57 MSRP: $112.00
You Save: $36.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact
- Position: Front
- Replaces: 4672311AA, 52851601AB, 4896061AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | R/T, SE, SRT-4, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Air Bag Sensor, Rear Part Number: 68056162AA
$89.62 MSRP: $132.00
You Save: $42.38 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front, Side, B Pillar, and C Pillar Sensors.
- Position: Rear
- Replaces: 4896152AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Impact Sensor, Outer Part Number: 4896065AB
$194.09 MSRP: $274.00
You Save: $79.91 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor Impact
- Position: Outer
- Replaces: 4896065AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | R/T, SE, SRT-4, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Side Impact Sensor Part Number: 4672312AA
Product Specifications
- Other Name: Sensor - Side Airbag Impact; Air Bag Impact Sensor; Air Bag Sensor; Sensor Side Airbag Impact
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Caliber | R/T, SE, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Air Bag Sensor

Choose OEM Air Bag Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Air Bag Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Air Bag Sensor is a critical factor that has made the improvement of safety and efficiency of Dodge Caliber, which was manufactured between 2007 and 2012. A very small but indispensable component of your car, this Air Bag Sensor, or the crash sensor, performs a pivotal role of sensing that there's been an impact and alerting the control unit to deploy the air bags for the protection of the passengers in the event of an accident. A very dependable and effective product, the Air Bag Sensor is versatile and can be used for different types of Caliber models such as the Caliber SE and Caliber SXT with the principal goal of providing safety for drivers and passengers. The Dodge Caliber has been given good ratings in the Insurance Institute for Highway Safety and this has supported the importance of the car's Air Bag Sensor in recording such standards when it is produced. The Air Bag Sensor comes with the optimal features like side and optional curtain airbags that act as a safety feature improving the performance of the car and giving it the optimal market reputation. Compatibility with any Caliber model makes it possible for drivers to have that constant quality, power, and efficiency. This is an essential component in the Dodge Caliber that is designed to enhance passenger safety and from this point of view, it can be pointed out that the Air Bag Sensor is an important component that reveals the brand's concern for passenger protection and is therefore incorporated into the design and construction of the car. To sum up, the Air Bag Sensor can be viewed as a bright example of the brand's commitment to consistent quality, power, and security in the automotive market.

Dodge Caliber Air Bag Sensor Parts and Q&A

Air Bag Sensor, Front
4896061AB
Q: How to Properly Install an Air Bag Sensor in the Engine Compartment on Dodge Caliber?
A:
Mount the left or right front impact sensor (3) into the engine compartment near its place and connect the harness connector (1) to the sensor. Then, set the sensor to the back of the radiator hanger vertical member, whose lower hole fits over the anti-rotation pin pressed to the back of the sensor. Screw and tighten (4) the middle vertical support screw to a torque of 8 Nm (71 in. lbs.) which will secure the sensor (3) to the back of the support vertical member (2). Connecting the negative cable before the system test could result in personal injury or death, so it should never be done before then.
Side Impact Sensor
4672312AA
Q: How to Service an Air Bag Sensor for Front Impact on Dodge Caliber?
A:
Before doing anything on the front impact sensor, break the connection of the negative battery wire and wait for two minutes to let the system reserve capacitor discharge. After that, get rid of the screw that holds the front impact sensor in place on the lower right or left radiator support vertical member. Remove the connector from the sensor and after that, uninstall the right or left front impact sensor from the engine compartment.