How to Service the Air Bag Sensor in the C-Pillar on 2009 Dodge Caliber?

To service the side impact sensor at the C-pillar, you need to disable SRS by removing and isolating the battery negative cable for two minutes after which the capacitor will be discharged and serious injury can be prevented. One should not hit, scratch or drop the side impact sensor, as impact may result in calibration problems that call for a replacement part. The sensors on the front and sides are designed to work either place. First, take out the quarter trim panel inside the lower C-pillar. After that, take out the screw that holds the side impact sensor to the C-pillar and disconnect the wire harness connector from the sensor's connector receptacle. The next step is to take out the sensor hidden behind the C-pillar.

OEM 2009 Dodge Caliber Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

View related parts
2009 Dodge Caliber Air Bag Sensor, Front Part Number: 4896061AB
$75.57 MSRP: $112.00
You Save: $36.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact
- Position: Front
- Replaces: 4672311AA, 52851601AB, 4896061AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.2 x 1.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Impact Sensor, Outer Part Number: 4896065AB
$194.09 MSRP: $274.00
You Save: $79.91 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor Impact
- Position: Outer
- Replaces: 4896065AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896065AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Dodge Caliber Air Bag Sensor Parts and Q&A

Q: How to Service the Air Bag Sensor in the C-Pillar on 2009 Dodge Caliber?
A: To service the side impact sensor at the C-pillar, you need to disable SRS by removing and isolating the battery negative cable for two minutes after which the capacitor will be discharged and serious injury can be prevented. One should not hit, scratch or drop the side impact sensor, as impact may result in calibration problems that call for a replacement part. The sensors on the front and sides are designed to work either place. First, take out the quarter trim panel inside the lower C-pillar. After that, take out the screw that holds the side impact sensor to the C-pillar and disconnect the wire harness connector from the sensor's connector receptacle. The next step is to take out the sensor hidden behind the C-pillar.