How to Ensure Proper Alignment of the Muffler When Assembling the Exhaust System on 2010 Dodge Caliber?

In installing exhaust system, tighten the clamp not until all the parts are in place. Fit the I-Pipe/ Muffler assembly, positioning each component, and clamp the band to 55 Nm tight. Do not over-tighten to avoid clamps destruction. Install the ground strap, and recheck the leaks and clearance, as required.

OEM 2010 Dodge Caliber Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mufflers found

View related parts
2010 Dodge Caliber Muffler & Pipe Part Number: 5105123AK
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Pipe; Resonator; Muffler
- Replaces: 5105119AF, 5105123AH, 5105123AF, 5105119AE, 5105119AG, 5105123AI, 5105123AG, 5105123AE
- Item Weight: 101.70 Pounds
- Item Dimensions: 96.6 x 45.5 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105123AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Muffler & Pipe Part Number: 5105694AJ
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Pipe; Resonator; Muffler
- Replaces: 5105694AE, 5105694AF, 5105694AG, 5105694AH
- Item Weight: 15.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105694AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Muffler Parts and Q&A

Q: How to Ensure Proper Alignment of the Muffler When Assembling the Exhaust System on 2010 Dodge Caliber?
A: In installing exhaust system, tighten the clamp not until all the parts are in place. Fit the I-Pipe/ Muffler assembly, positioning each component, and clamp the band to 55 Nm tight. Do not over-tighten to avoid clamps destruction. Install the ground strap, and recheck the leaks and clearance, as required.