How to Service and Repair the Front Cross-Member and Rear Crossmember on 2010 Dodge Caliber?

To service the front and rear crossmembers, raise the vehicle and remove the four wheel well screws. If applicable, take out three front screws, three rear screws, and one belly pan push pin. Finally, remove the crossmember bolts and engine roll mount through bolt before removing the crossmember.

OEM 2010 Dodge Caliber Rear Crossmember

Rear Suspension Crossmember

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rear Crossmembers found

View related parts
2010 Dodge Caliber Suspension Crossmember, Rear Part Number: 68211933AB
$739.67 MSRP: $1085.00
You Save: $345.33 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Rear Suspension; Suspension Subframe Crossmember, Rear; Crossmember; Crossmember Rear Suspension
- Position: Rear
- Replaces: 5105251AC, 5105251AB, 5105251AD, 68211933AA, 5105251AA
- Item Weight: 30.70 Pounds
- Item Dimensions: 44.4 x 10.2 x 19.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68211933AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Rear Crossmember Part Number: 5115538AB
$269.65 MSRP: $397.00
You Save: $127.35 (33%)
ADD TO CART
Product Specifications
- Other Name: Crossmember - Rear Floor; Floor Crossmember; Crossmember Rear Floor
- Position: Rear
- Replaces: 5115538AA
- Item Weight: 5.20 Pounds
- Item Dimensions: 28.1 x 5.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5115538AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Rear Crossmember Parts and Q&A

Q: How to Service and Repair the Front Cross-Member and Rear Crossmember on 2010 Dodge Caliber?
A: To service the front and rear crossmembers, raise the vehicle and remove the four wheel well screws. If applicable, take out three front screws, three rear screws, and one belly pan push pin. Finally, remove the crossmember bolts and engine roll mount through bolt before removing the crossmember.