OEM 2010 Dodge Caliber Shift Cable

2010 Dodge Caliber Shift Cable Parts and Q&A

• Q: How to Install a Shift Cable for the Shift Interlock System on 2010 Dodge Caliber?

  A: Position the cable between the shifter and the steering column and after that secure the cable clip to the shifter. Following that, use the shifter bolts to lock the shifter in position and tighten them to 70 Nm (52 ft. lbs.). Install the console and then hook up the electrical connector if your vehicle is so equipped. Following that, replace the console screws and the bezel screws for the shifter. With the ignition on, insert the interlock cable deep enough into the column so that it clicks and then test how it works with the ignition-shift interlock. Then, install the lower shroud.