How to install a Clutch Slave Cylinder on 2010 Dodge Caliber?

Install the friction clutch (1) by attaching it to the transaxle with new bolts, but first tighten the three CSC body screws, then hook up the fluid tube. Perform this in three steps: first, use 2 Nm (18 in. lbs.), then increase to 5 Nm (44 in. lbs.) and the final step is 8.4 Nm (74 in. lbs.). After getting the slave cylinder in place, install the transaxle and then start bleeding the clutch hydraulics.

OEM 2010 Dodge Caliber Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2010 Dodge Caliber Slave Cylinder Part Number: 68033396AA
Product Specifications
- Other Name: Actuator - Clutch; Clutch Slave Cylinder
- Replaces: 5037863AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.1 x 6.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033396AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Clutch Slave Cylinder Parts and Q&A

Q: How to install a Clutch Slave Cylinder on 2010 Dodge Caliber?
A: Install the friction clutch (1) by attaching it to the transaxle with new bolts, but first tighten the three CSC body screws, then hook up the fluid tube. Perform this in three steps: first, use 2 Nm (18 in. lbs.), then increase to 5 Nm (44 in. lbs.) and the final step is 8.4 Nm (74 in. lbs.). After getting the slave cylinder in place, install the transaxle and then start bleeding the clutch hydraulics.