How to Install a Sway Bar Kit for Rear Suspension on 2010 Dodge Caliber?

If required, before mounting the rear suspension sway bar kit, set the cushions first so both cushions are on the bar, using the cut slits on the cushions. After that, place the sway bar kit on the rear crossmember. Place a retainer on each of the cushions over the holes and fasten them with the screws, but no need to tighten just yet. After putting the sway bar link upper stud into both sides of the sway bar kit, tighten the nut at the end of each stud to make it stationary and add 50 Nm (37 ft. lbs.) of torque. Following this, use a torque wrench to fix the cushion retainer screws at 34 Nm (25 ft. lbs.) and then settle the vehicle.

OEM 2010 Dodge Caliber Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Kits found

View related parts
2010 Dodge Caliber Stabilizer Bar, Front Part Number: 5105100AC
$69.26 MSRP: $157.00
You Save: $87.74 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 5105100AA, 5105100AB
- Item Weight: 10.60 Pounds
- Item Dimensions: 41.4 x 9.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105100AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Bar - Front Part Number: 5105101AD
$148.30 MSRP: $225.00
You Save: $76.70 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BAR-FRONT
- Position: Front
- Replaces: 5105101AA, 5105101AC, 5105101AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105101AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Stabilizer Bar, Rear Part Number: 5151810AB
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar Bushing; Sway Bar; Bushing; Stabilizer Bar Rear Suspension
- Position: Rear
- Replaces: 5151810AA
- Item Weight: 3.70 Pounds
- Item Dimensions: 38.1 x 8.3 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5151810AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Sway Bar Kit Parts and Q&A

Q: How to Install a Sway Bar Kit for Rear Suspension on 2010 Dodge Caliber?
A: If required, before mounting the rear suspension sway bar kit, set the cushions first so both cushions are on the bar, using the cut slits on the cushions. After that, place the sway bar kit on the rear crossmember. Place a retainer on each of the cushions over the holes and fasten them with the screws, but no need to tighten just yet. After putting the sway bar link upper stud into both sides of the sway bar kit, tighten the nut at the end of each stud to make it stationary and add 50 Nm (37 ft. lbs.) of torque. Following this, use a torque wrench to fix the cushion retainer screws at 34 Nm (25 ft. lbs.) and then settle the vehicle.