How Is the Blower Motor Resistor Installed on 2010 Dodge Challenger?

Installation of the blower motor resistor requires two screws that are screwed into the HVAC housing and fastened to 2 Nm (17 in. lbs.). Attach the wire harness to the resistor making the locking tab click. Lastly, put back the glove box and the negative battery cable.

OEM 2010 Dodge Challenger Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2010 Dodge Challenger Resistor Part Number: 68037310AB
$15.81 MSRP: $34.25
You Save: $18.44 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Replaces: 68037310AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.5 x 4.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68037310AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2010 Dodge Challenger Blower Motor Resistor Parts and Q&A

Q: How Is the Blower Motor Resistor Installed on 2010 Dodge Challenger?
A: Installation of the blower motor resistor requires two screws that are screwed into the HVAC housing and fastened to 2 Nm (17 in. lbs.). Attach the wire harness to the resistor making the locking tab click. Lastly, put back the glove box and the negative battery cable.