How to Correctly Install a Camshaft Position Sensor on 2010 Dodge Challenger?

Before installing the Camshaft Position Sensor, push it deeply into the timing belt cover with a twisting motion to fully seat it; do not try to install it with the mounting screw at this point because incorrect seating will result in a faulty signal. When reattaching the sensor, first look for splits in the O-ring and apply some fresh engine oil to help it function well. After you have put the sensor in place, grab it and attach the retaining bolt, tightening it to 12 Nm (106 in. lbs.). After that, attach and fasten the electrical connector to the sensor. In the end, put the battery cable on the negative side, tightening the nut to 5 Nm (45 in. lbs.). Any time the flywheel, valvetrain, camshaft or crankshaft sensors are repaired or replaced, the Cam/Crank Variation Relearn procedure should be carried out.

OEM 2010 Dodge Challenger Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2010 Dodge Challenger Camshaft Position Sensor Part Number: 5149054AC
$34.88 MSRP: $51.70
You Save: $16.82 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Cam Sensor; Sensor Camshaft
- Replaces: 5149054AA, 5149054AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.1 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149054AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Crankshaft Position Sensor Part Number: 5029808AD
Product Specifications
- Other Name: Engine Camshaft Position Sensor; Camshaft Position Sensor; Sensor Camshaft
- Replaces: 68013184AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 2.0 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5029808AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- SE | 6 Cyl 3.5 L GAS

2010 Dodge Challenger Camshaft Position Sensor Parts and Q&A

Q: How to Correctly Install a Camshaft Position Sensor on 2010 Dodge Challenger?
A: Before installing the Camshaft Position Sensor, push it deeply into the timing belt cover with a twisting motion to fully seat it; do not try to install it with the mounting screw at this point because incorrect seating will result in a faulty signal. When reattaching the sensor, first look for splits in the O-ring and apply some fresh engine oil to help it function well. After you have put the sensor in place, grab it and attach the retaining bolt, tightening it to 12 Nm (106 in. lbs.). After that, attach and fasten the electrical connector to the sensor. In the end, put the battery cable on the negative side, tightening the nut to 5 Nm (45 in. lbs.). Any time the flywheel, valvetrain, camshaft or crankshaft sensors are repaired or replaced, the Cam/Crank Variation Relearn procedure should be carried out.