How to Install the Cruise Control Switch on 2010 Dodge Challenger?

To install the speed control switch, attach it to the steering wheel and secure it with two screws at the rear (1 Nm) and one at the front (3.5 Nm). Connect the electrical connector, install the driver's airbag, verify operation, and reconnect the negative battery cable.

OEM 2010 Dodge Challenger Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Switch found

View related parts
2010 Dodge Challenger On/Off Switch Part Number: 56046079AC
$61.18 MSRP: $90.30
You Save: $29.12 (33%)
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Release Switch; Cruise Control Switch; Cruise Switch; Switch
- Replaces: 56046079AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 3.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56046079AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2010 Dodge Challenger Cruise Control Switch Parts and Q&A

Q: How to Install the Cruise Control Switch on 2010 Dodge Challenger?
A: To install the speed control switch, attach it to the steering wheel and secure it with two screws at the rear (1 Nm) and one at the front (3.5 Nm). Connect the electrical connector, install the driver's airbag, verify operation, and reconnect the negative battery cable.