How to Remove and Replace an Oil Filter on 2010 Dodge Challenger?

Begin by wiping off the base and looking at the contact area of the gasket to remove and replace the engine oil filter. After that, put some clean engine oil on the gasket of the new filter (2). After making sure the gasket is touching the base, install the filter with a torque of 12 Nm (106 in. lbs.) by using a filter wrench. After that, turn the engine on and look for any leaks.

OEM 2010 Dodge Challenger Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Filters found

View related parts
2010 Dodge Challenger Oil Filter Part Number: 4884899AC
$6.87 MSRP: $10.05
You Save: $3.18 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Filter Engine Oil [22Mm]; Filter Engine Oil
- Replaces: 4884899AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.2 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884899AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Oil Filter Part Number: 4892339BE
$8.85 MSRP: $13.10
You Save: $4.25 (33%)
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Oil Pan; Filter Assembly
- Replaces: 5047769AA, 4892339AA, 4892339AB, 4884900AB, FE00301, 68197769AA
- Item Weight: 7.10 Pounds
- Item Dimensions: 12.9 x 9.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892339BE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, T/A | 3.5L V6, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS

2010 Dodge Challenger Oil Filter Parts and Q&A

Q: How to Remove and Replace an Oil Filter on 2010 Dodge Challenger?
A: Begin by wiping off the base and looking at the contact area of the gasket to remove and replace the engine oil filter. After that, put some clean engine oil on the gasket of the new filter (2). After making sure the gasket is touching the base, install the filter with a torque of 12 Nm (106 in. lbs.) by using a filter wrench. After that, turn the engine on and look for any leaks.