How to Service and Repair the Left Engine Mount on 2010 Dodge Challenger?

First, remove and keep the negative battery cable disconnected to service and fix the left engine mount. Make sure to lift and hold the vehicle properly. Untighten and remove the fasteners that secure the rear belly pan on the bottom of the car and take out the belly pan. After that, take out the nuts on both sides of the engine mount to cradle and the engine mount bolts through the studs. Raise the engine on a jack stand and a block of wood below the oil pan so that it falls off the left mounts by 5 mm, then take out the bolts and the left mount heat shield and finally the bolts and the left engine mount.

OEM 2010 Dodge Challenger Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Engine Mounts found

View related parts
2010 Dodge Challenger Transmission Mount Part Number: 4578062AC
$58.15 MSRP: $87.15
You Save: $29.00 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount; Automatic & Manual Transmission Mount; Engine & Transfer Case Mount; Motor Mount; Support Bracket; Transmission Mount Bracket; Transmission Support; Bracket Transmission Mount
- Replaces: 4578062AB
- Item Weight: 5.30 Pounds
- Item Dimensions: 7.4 x 5.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578062AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, Rallye Redline, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Mount Bracket, Front Driver Side Part Number: 4578053AC
$100.40 MSRP: $152.00
You Save: $51.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount, Front Left; Motor Mount; Front Mount; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Front Driver Side
- Replaces: 4578053AB
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.0 x 5.2 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578053AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SRT8 | 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Mount Bracket, Driver Side Part Number: 4578051AC
$104.38 MSRP: $158.00
You Save: $53.62 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount, Front Left; Motor Mount; Side Mount; Front Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Replaces: 4578051AB
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.6 x 7.4 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578051AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- SE | 6 Cyl 3.5 L GAS
View related parts
2010 Dodge Challenger Transmission Mount Part Number: 68271940AA
$63.39 MSRP: $94.95
You Save: $31.56 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount - Transmission; Manual Transmission Mount; Transfer Case Mount; Mount Transmission
- Replaces: 5180484AB
- Item Weight: 3.50 Pounds
- Item Dimensions: 11.9 x 8.5 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68271940AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, Scat Pack, Scat Pack 392 Widebody, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Mount Part Number: 5180406AE
$119.48 MSRP: $247.00
You Save: $127.52 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Motor Mount; Insulator Engine Mount
- Item Weight: 5.00 Pounds
- Item Dimensions: 6.3 x 6.8 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5180406AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T | 8 Cyl 5.7 L GAS
View related parts
2010 Dodge Challenger Transmission Mount Part Number: 68092519AA
$53.98 MSRP: $79.25
You Save: $25.27 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission; Automatic Transmission Mount; Transfer Case Mount; Motor Mount; Insulator; Mount Transmission
- Item Weight: 2.00 Pounds
- Item Dimensions: 2.9 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68092519AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392 | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Front Mount Part Number: 4578046AF
$121.57 MSRP: $161.00
You Save: $39.43 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount
- Position: Front
- Item Weight: 4.20 Pounds
- Item Dimensions: 4.6 x 5.9 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578046AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T | 8 Cyl 5.7 L GAS
View related parts
2010 Dodge Challenger Mount Bracket, Passenger Side Part Number: 4578052AB
$101.86 MSRP: $155.00
You Save: $53.14 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Motor Mount; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 4578052AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.0 x 4.8 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578052AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SRT8 | 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Front Mount Part Number: 4578044AF
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Cushion Engine Support; Engine Mount
- Position: Front
- Replaces: 4578044AC, 4578044AD, 4578044AE
- Item Weight: 4.20 Pounds
- Item Dimensions: 4.7 x 6.2 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578044AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- SE | 6 Cyl 3.5 L GAS
View related parts
2010 Dodge Challenger Front Mount Part Number: 68417512AB
$206.21 MSRP: $304.00
You Save: $97.79 (33%)
Product Specifications
- Other Name: Gasket Kit - Engine; Valve Grind Gasket Kit; Overhaul Gasket Set
- Replaces: 68196239AC, 68196239AA, 68196239AB, 68417512AA, 68046260AA
- Item Weight: 3.00 Pounds
- Item Dimensions: 21.0 x 12.7 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68417512AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Shaker, SRT8, T/A | 5.7L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Mount Bracket Part Number: 5180488AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Bracket Engine Mount
- Item Weight: 2.10 Pounds
- Item Dimensions: 4.1 x 5.2 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5180488AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- SRT8 | 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Front Mount Part Number: 5037794AC
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Cushion Engine Support; Insulator Engine Mount
- Position: Front
- Replaces: 5037794AA, 5037794AB
- Item Weight: 4.20 Pounds
- Item Dimensions: 4.6 x 6.1 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037794AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- SRT8 | 8 Cyl 6.1 L GAS

2010 Dodge Challenger Engine Mount Parts and Q&A

Q: How to Service and Repair the Left Engine Mount on 2010 Dodge Challenger?
A: First, remove and keep the negative battery cable disconnected to service and fix the left engine mount. Make sure to lift and hold the vehicle properly. Untighten and remove the fasteners that secure the rear belly pan on the bottom of the car and take out the belly pan. After that, take out the nuts on both sides of the engine mount to cradle and the engine mount bolts through the studs. Raise the engine on a jack stand and a block of wood below the oil pan so that it falls off the left mounts by 5 mm, then take out the bolts and the left mount heat shield and finally the bolts and the left engine mount.