How to Service a Power Steering Reservoir on 2010 Dodge Challenger?

For servicing the power steering reservoir, you have to first disconnect and isolate the negative battery cable. Take out the fluid from the power steering pump reservoir. After that, take out the air filter housing so you can clean the air tube going to the throttle body. After that, take off the retaining clamp on the supply hose at the reservoir, then detach the hose. Then remove the retaining clamp on the return hose at the reservoir and disconnect it as well. Upward and outward movement of the reservoir will separate it from the coolant bottle.

OEM 2010 Dodge Challenger Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Reservoir found

View related parts
2010 Dodge Challenger Reservoir Part Number: 4782345AC
$115.67 MSRP: $171.00
You Save: $55.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Power Steering Fluid; Power Steering Reservoir; Reservoir Power Steering Fluid; Reservoir Power Steering Pump
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.9 x 4.8 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782345AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2010 Dodge Challenger Power Steering Reservoir Parts and Q&A

Q: How to Service a Power Steering Reservoir on 2010 Dodge Challenger?
A: For servicing the power steering reservoir, you have to first disconnect and isolate the negative battery cable. Take out the fluid from the power steering pump reservoir. After that, take out the air filter housing so you can clean the air tube going to the throttle body. After that, take off the retaining clamp on the supply hose at the reservoir, then detach the hose. Then remove the retaining clamp on the return hose at the reservoir and disconnect it as well. Upward and outward movement of the reservoir will separate it from the coolant bottle.