Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Dodge Challenger Steering Column Cover

Steering Column Cover Bezel
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Column Covers found

  • 2010 Dodge Challenger Steering Column Cover - 1DE80XDVAE
    2010 Dodge Challenger Steering Column Cover Diagram - 1DE80XDVAE
    View related parts

    2010 Dodge Challenger Column Cover Part Number: 1DE80XDVAE

    Product Specifications
    • Other Name: Cover - Steering Column; Instrument Panel Knee Bolster
    • Replaces: 1DE80XDVAD
    • Item Weight: 3.50 Pounds
    • Item Dimensions: 27.0 x 14.1 x 8.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 1DE80XDVAE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Dodge Challenger Submodels:
    • R/T, SE, SRT8 | 5.7L V8, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
  • 2010 Dodge Challenger Steering Column Cover - UU28XXXAD
    2010 Dodge Challenger Steering Column Cover Diagram - UU28XXXAD
    View related parts

    2010 Dodge Challenger Shroud Part Number: UU28XXXAD

    Product Specifications
    • Other Name: Shroud - Steering Column; Steering Column Cover; Shroud Steering Column
    • Replaces: UU28XXXAC, UU28XXXAB, UU28XXXAA
    • Item Weight: 1.00 Pounds
    • Item Dimensions: 9.3 x 6.5 x 6.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: UU28XXXAD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Dodge Challenger Submodels:
    • R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS

2010 Dodge Challenger Steering Column Cover Parts and Q&A

  • Q: How to Install a Steering Column Cover on 2010 Dodge Challenger?
    A: The first step is to attach the instrument panel steering column cover reinforcement to the bracket, hold the opening cover against it and fasten the supporting screws tight. Place the steering column cover into the vehicle and join the release cable to the emergency brake release handle after that. Should there be a harness available, attach the wire harness connector to the trunk release switch. Lift the steering column cover, fit it onto the instrument panel and press down on the right side and the top to secure the retainers properly. Attach the steering column cover to the instrument panel with screws that you tighten firmly and finally, hook up the negative battery cable. Whenever power to the door module in Automatic Express Up equipped vehicles is cut off, it needs to be recalibrated.

Related 2010 Dodge Challenger Parts

Alternate Year Models

+
2009 Dodge Challenger Steering Column Cover 2011 Dodge Challenger Steering Column Cover