How to Service and Repair a Power Steering Hose from Gear to Cooler for Return Hose on 2010 Dodge Challenger?

Begin by pulling out and isolating the negative cable from the car's battery post to fix problems with the power steering return hose. Pour the power steering fluid from the pump reservoir and after that, raise and support the vehicle. Take out the belly pan. After that, remove the hose clamp and take out the return hose from the cooler. Take out the screw holding the routing clamps in place on the right hand side of the engine cradle where the pressure and return hoses are secured. Remove the return hose tube nut from the steering gear and detach the return hose from the clip on the cooling module before you can take the hose out of the vehicle.

OEM 2010 Dodge Challenger Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Power Steering Hoses found

View related parts
2010 Dodge Challenger Power Steering Pressure Hose Part Number: 68043618AD
$97.44 MSRP: $146.00
You Save: $48.56 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Lower Pressure Hose
- Replaces: 68043618AC, 68043618AA, 68043618AB
- Item Weight: 2.40 Pounds
- Item Dimensions: 23.3 x 8.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68043618AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Power Steering Pressure Hose Part Number: 4782518AI
$109.27 MSRP: $166.00
You Save: $56.73 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Lower Pressure Hose; Upper Pressure Hose
- Replaces: 4782518AG, 4782518AH, 4782518AE, 4782518AD, 4782518AC, 4782518AF
- Item Weight: 2.20 Pounds
- Item Dimensions: 5.2 x 8.3 x 22.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782518AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SRT8 | 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Power Steering Pressure Hose Part Number: 4782363AF
$213.00 MSRP: $317.00
You Save: $104.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Return Hose; Power Steering Hose; Return Hose; Upper Pressure Hose; Lower Return Hose
- Replaces: 4782363AC, 4782363AD, 4782363AE
- Item Weight: 1.00 Pounds
- Item Dimensions: 37.8 x 17.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782363AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Power Steering Pressure Hose Part Number: 4782350AC
$35.72 MSRP: $53.20
You Save: $17.48 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Supply; Power Steering Reservoir Hose; Power Steering Hose; Power Steering Suction Hose; Upper Return Hose; Hose Power Steering Supply Reservoir To Pump; Hose Power Steering Supply
- Item Weight: 1.00 Pounds
- Item Dimensions: 17.5 x 7.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782350AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Power Steering Return Hose Part Number: 68044363AC
$45.62 MSRP: $67.90
You Save: $22.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Lower Return Hose
- Replaces: 68044363AA, 4895221AC, 68044363AB
- Item Weight: 2.40 Pounds
- Item Dimensions: 31.8 x 12.6 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68044363AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 3.5L V6, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Power Steering Suction Hose Part Number: 4782349AC
Product Specifications
- Other Name: Hose - Power Steering Supply; Power Steering Reservoir Hose; Power Steering Hose; Upper Return Hose; Hose Power Steering Supply
- Item Weight: 0.90 Pounds
- Item Dimensions: 14.5 x 7.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782349AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- SE | 6 Cyl 3.5 L GAS
View related parts
2010 Dodge Challenger Power Steering Return Hose Part Number: 68044362AA
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Upper Pressure Hose; Lower Return Hose; Hose Power Steering Return Cooler To Reservoir; Hose Power Steering Return
- Item Weight: 0.90 Pounds
- Item Dimensions: 4.6 x 6.8 x 21.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68044362AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Lower Return Hose Part Number: 68043769AC
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Return Hose; Power Steering Hose; Hose Power Steering Return Gear To Cooler
- Replaces: 68043769AA, 68043769AB
- Item Weight: 2.40 Pounds
- Item Dimensions: 30.3 x 12.6 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68043769AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2010 Dodge Challenger Power Steering Pressure Hose Part Number: 4578752AE
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 4578752AC, 4578752AD, 4578752AB
- Item Weight: 4.00 Pounds
- Item Dimensions: 23.1 x 22.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578752AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2010 Dodge Challenger Power Steering Pressure Hose Part Number: 5180007AF
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Lower Pressure Hose
- Replaces: 5180007AE, 5180007AA, 5180007AC, 5180007AD, 5180007AB
- Item Weight: 2.40 Pounds
- Item Dimensions: 22.9 x 8.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5180007AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- SE | 3.5L V6, 6 Cyl 3.5 L GAS

2010 Dodge Challenger Power Steering Hose Parts and Q&A

Q: How to Service and Repair a Power Steering Hose from Gear to Cooler for Return Hose on 2010 Dodge Challenger?
A: Begin by pulling out and isolating the negative cable from the car's battery post to fix problems with the power steering return hose. Pour the power steering fluid from the pump reservoir and after that, raise and support the vehicle. Take out the belly pan. After that, remove the hose clamp and take out the return hose from the cooler. Take out the screw holding the routing clamps in place on the right hand side of the engine cradle where the pressure and return hoses are secured. Remove the return hose tube nut from the steering gear and detach the return hose from the clip on the cooling module before you can take the hose out of the vehicle.