How Is the Valve Body Installed During the Transmission Assembly Process on 2010 Dodge Challenger?

To install the valve body, position the valve body and torque bolts to 12 Nm. Install the transmission oil filter and top up the sealing patch of oil pan bolt. Apply RTV, tighten bolts 20 Nm, reconnect sensors, fill with ATF+4, Quick Learn Procedure.

OEM 2010 Dodge Challenger Valve Body

Trans Valve Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Valve Body found

View related parts
2010 Dodge Challenger Valve Body Part Number: RX108213AB
Product Specifications
- Other Name: Valve - Complete; Valve Body Complete
- Condition: New
- Fitment Type: Direct Replacement
- SKU: RX108213AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2010 Dodge Challenger Submodels:
- R/T, R/T Classic, Rallye Redline, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS

2010 Dodge Challenger Valve Body Parts and Q&A

Q: How Is the Valve Body Installed During the Transmission Assembly Process on 2010 Dodge Challenger?
A: To install the valve body, position the valve body and torque bolts to 12 Nm. Install the transmission oil filter and top up the sealing patch of oil pan bolt. Apply RTV, tighten bolts 20 Nm, reconnect sensors, fill with ATF+4, Quick Learn Procedure.