How to Install an Antenna Cable for the Instrument Panel on 2010 Jeep Liberty?

Before you attach the instrument panel antenna cable, remove the negative battery cable, isolate it and wait two minutes until the air bag capacitor discharges. Place the antenna cable for the instrument panel onto the instrument panel and use all the retainers provided to hold the cable on the back. Attach the cable to the radio and after that, install the instrument panel. In the end, reconnect the battery cable that has the negative sign on it.

OEM 2010 Jeep Liberty Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Antenna Cables found

View related parts
2010 Jeep Liberty Antenna Cable Part Number: 5064671AA
Product Specifications
- Other Name: Cable - Antenna; GPS Navigation System Antenna Cable; Cable Antenna
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064671AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2010 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
2010 Jeep Liberty Cable Part Number: 5064672AA
Product Specifications
- Other Name: Cable - Satellite Radio; Antenna Cable; Cable Satellite Radio
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064672AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2010 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

2010 Jeep Liberty Antenna Cable Parts and Q&A

Q: How to Install an Antenna Cable for the Instrument Panel on 2010 Jeep Liberty?
A: Before you attach the instrument panel antenna cable, remove the negative battery cable, isolate it and wait two minutes until the air bag capacitor discharges. Place the antenna cable for the instrument panel onto the instrument panel and use all the retainers provided to hold the cable on the back. Attach the cable to the radio and after that, install the instrument panel. In the end, reconnect the battery cable that has the negative sign on it.