How to Install a Washer Pump on 2010 Jeep Liberty?

The first step is to put a new grommet seal/filter screen into the mounting hole in the washer reservoir. Fit the inlet nipple of the washer pump onto the rubber grommet seal/filter screen in the washer reservoir and push the washer pump/motor unit downwards, pressing the nipple tightly against the screen. Put the pump/motor housing on the washer receptacle until the top lining up, then press until the motor housing locks into position. Thread the old front and rear washer hoses onto the two barbed outlet nipples from the pump and then reconnect the wire harness for the washer from the front module to the top of the washer pump casing. At the end, attach the negative cable back and then fill the washer tank with the fluid you removed.

OEM 2010 Jeep Liberty Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Washer Pumps found

View related parts
2010 Jeep Liberty Washer Pump Part Number: 5152030AA
$20.82 MSRP: $29.95
You Save: $9.13 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grommet - Windshield Washer Pump; Windshield Washer Pump Grommet; Washer Pump Grommet; Grommet; Grommet Windshield Washer Pump Pump Grommet; Grommet Windshield Washer Pump
- Replaces: 68225069AA, 68145029AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.4 x 1.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5152030AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2010 Jeep Liberty Washer Pump Part Number: 5179153AC
$112.79 MSRP: $167.00
You Save: $54.21 (33%)
Product Specifications
- Other Name: Pump - Washer, Windshield; Windshield Washer Pump; Washer Pump Repair Kit; Front Pump; Front Washer Pump; Rear Washer Pump; Pump Windshield Washer Dual Outlet; Pump Washer, Windshield
- Replaces: 5179153AB, 5179153AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.6 x 3.5 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179153AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Sport | 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2010 Jeep Liberty Washer Pump Parts and Q&A

Q: How to Install a Washer Pump on 2010 Jeep Liberty?
A: The first step is to put a new grommet seal/filter screen into the mounting hole in the washer reservoir. Fit the inlet nipple of the washer pump onto the rubber grommet seal/filter screen in the washer reservoir and push the washer pump/motor unit downwards, pressing the nipple tightly against the screen. Put the pump/motor housing on the washer receptacle until the top lining up, then press until the motor housing locks into position. Thread the old front and rear washer hoses onto the two barbed outlet nipples from the pump and then reconnect the wire harness for the washer from the front module to the top of the washer pump casing. At the end, attach the negative cable back and then fill the washer tank with the fluid you removed.