How to Remove and Replace a Rear Brake Caliper on 2010 Jeep Liberty?

Always put in the brake pads before you begin the process of removing and replacing the rear brake caliper. After that, install the caliper and tighten its bolts to 37 Nm (28 ft. lbs.), checking that the brake hose is not twisted or kinked before you finish fastening the fitting bolt. Ensure you secure the pipe to the caliper with fresh seal washers and use the banjo bolt to attach it securely. Remember to tighten it up to 31 Nm (23 ft. lbs.). Then, remove the prop rod and be sure to bleed the repair section of the brake system; if the pedal does not feel right after bleed, carry out a base bleed system. Put the wheel and tire onto the hub and then remove the support stands and bring the vehicle down. Check that a firm pedal is there before starting to move the vehicle.

OEM 2010 Jeep Liberty Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Calipers found

View related parts
2010 Jeep Liberty Caliper, Rear Driver Side Part Number: 68003778AA
$314.26 MSRP: $464.00
You Save: $149.74 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.80 Pounds
- Item Dimensions: 3.4 x 6.4 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003778AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
2010 Jeep Liberty Caliper, Front Driver Side Part Number: 68003707AC
$297.27 MSRP: $438.00
You Save: $140.73 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left, Front Right; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Driver Side
- Replaces: 68003707AA, R8003707AC
- Item Weight: 7.50 Pounds
- Item Dimensions: 5.8 x 7.9 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003707AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2010 Jeep Liberty Caliper, Front Passenger Side Part Number: 68003697AC
$297.27 MSRP: $438.00
You Save: $140.73 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left, Front Right; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Passenger Side
- Replaces: R8003697AC, 68003697AA
- Item Weight: 7.90 Pounds
- Item Dimensions: 5.0 x 8.0 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003697AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2010 Jeep Liberty Caliper, Rear Driver Side Part Number: 68003774AA
$314.26 MSRP: $464.00
You Save: $149.74 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.70 Pounds
- Item Dimensions: 8.3 x 16.1 x 20.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003774AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

2010 Jeep Liberty Brake Caliper Parts and Q&A

Q: How to Remove and Replace a Rear Brake Caliper on 2010 Jeep Liberty?
A: Always put in the brake pads before you begin the process of removing and replacing the rear brake caliper. After that, install the caliper and tighten its bolts to 37 Nm (28 ft. lbs.), checking that the brake hose is not twisted or kinked before you finish fastening the fitting bolt. Ensure you secure the pipe to the caliper with fresh seal washers and use the banjo bolt to attach it securely. Remember to tighten it up to 31 Nm (23 ft. lbs.). Then, remove the prop rod and be sure to bleed the repair section of the brake system; if the pedal does not feel right after bleed, carry out a base bleed system. Put the wheel and tire onto the hub and then remove the support stands and bring the vehicle down. Check that a firm pedal is there before starting to move the vehicle.