How to Install and Initialize an ABS Control Module in an Antilock Brake System on 2010 Jeep Liberty?

Place the ABM (2) onto the rubber pads located on the mounting bracket (1) for the first step in installing the Hydraulic Control unit (HCU) for the antilock brakes. After that, link the brake lines to the ABM (2) and tighten them down with a torque of 20 Nm (180 in. lbs.). Make sure to push the release on the wiring harness to securely link it to the ABM. Once again connect the negative battery cable to the battery. Now, drain the ABS brake system. In the end, attach the scan tool and start the ABM with the ABS Verification Test.

OEM 2010 Jeep Liberty ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2010 Jeep Liberty Control Module Part Number: 68043465AA
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module; Module Anti-Lock Brake System
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.5 x 6.5 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68043465AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
2010 Jeep Liberty Modulator Part Number: 68043462AA
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; Control Unit Anti-Lock Brake
- Item Weight: 2.40 Pounds
- Item Dimensions: 9.2 x 7.4 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68043462AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

2010 Jeep Liberty ABS Control Module Parts and Q&A

Q: How to Install and Initialize an ABS Control Module in an Antilock Brake System on 2010 Jeep Liberty?
A: Place the ABM (2) onto the rubber pads located on the mounting bracket (1) for the first step in installing the Hydraulic Control unit (HCU) for the antilock brakes. After that, link the brake lines to the ABM (2) and tighten them down with a torque of 20 Nm (180 in. lbs.). Make sure to push the release on the wiring harness to securely link it to the ABM. Once again connect the negative battery cable to the battery. Now, drain the ABS brake system. In the end, attach the scan tool and start the ABM with the ABS Verification Test.