How to Correctly Install an Oxygen Sensor on 2010 Jeep Liberty?

Instead of adding extra anti-seize compound, you should be sure the threads on your new oxygen sensor already have anti-seize compound applied from the factory. Put in the O2S sensor, tighten it to 41 Nm (30 ft. lbs.) and link the O2S wire connector, then lowers the vehicle.

OEM 2010 Jeep Liberty Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oxygen Sensor found

View related parts
2010 Jeep Liberty Oxygen Sensor, Front Driver Side Part Number: 56029049AA
$97.32 MSRP: $144.00
You Save: $46.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS

2010 Jeep Liberty Oxygen Sensor Parts and Q&A

Q: How to Correctly Install an Oxygen Sensor on 2010 Jeep Liberty?
A: Instead of adding extra anti-seize compound, you should be sure the threads on your new oxygen sensor already have anti-seize compound applied from the factory. Put in the O2S sensor, tighten it to 41 Nm (30 ft. lbs.) and link the O2S wire connector, then lowers the vehicle.