How to Install a MAP Sensor on 2010 Jeep Liberty?

The first part of installing the MAP sensor is to thoroughly clean the intake manifold's sensor mounting spot. After that, make sure there are no cuts or tears in the o-ring seal around the MAP sensor (2). Slip the MAP sensor onto the locating pin (6) on the manifold to place it straight. Insert and tighten the mounting bolt (8) with a torque of 3 Nm (25 in. lbs.). At the very end, attach the electrical connector (2).

OEM 2010 Jeep Liberty MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2010 Jeep Liberty M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS

2010 Jeep Liberty MAP Sensor Parts and Q&A

Q: How to Install a MAP Sensor on 2010 Jeep Liberty?
A: The first part of installing the MAP sensor is to thoroughly clean the intake manifold's sensor mounting spot. After that, make sure there are no cuts or tears in the o-ring seal around the MAP sensor (2). Slip the MAP sensor onto the locating pin (6) on the manifold to place it straight. Insert and tighten the mounting bolt (8) with a torque of 3 Nm (25 in. lbs.). At the very end, attach the electrical connector (2).