How to Remove the A/C Hose Suction Line on 2010 Jeep Wrangler?

Before removing the A/C suction line, disconnect and isolate the negative battery cable. Take out the refrigerant from the refrigerant system. Following that, remove the nut holding the A/C liquid line to the A/C expansion valve and release the A/C liquid line and suction line from the valve. Throw the old O-ring seals away. Should this be necessary, remove the metal retaining bracket that holds the A/C liquid line to the suction line. On 2.8L diesel engines, take the air line off the throttle body and put it aside. After that, take off the nut holding the A/C suction line to the compressor, break the seal between the suction line and the compressor and throw away the O-ring and gasket. Install plugs or tape in the open liquid and suction line fittings as well as the ports on the compressor and expansion valve.

OEM 2010 Jeep Wrangler A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Hoses found

View related parts
2010 Jeep Wrangler A/C Hoses Part Number: 55056589AB
$99.01 MSRP: $151.00
You Save: $51.99 (35%)
ADD TO CART
Product Specifications
- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line; Line A/C Discharge
- Item Weight: 0.80 Pounds
- Item Dimensions: 20.2 x 5.7 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55056589AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 6 Cyl 3.8 L GAS
View related parts
2010 Jeep Wrangler A/C Hoses Part Number: 55056587AC
$200.54 MSRP: $295.00
You Save: $94.46 (33%)
ADD TO CART
Product Specifications
- Other Name: Line - A/C Suction And Liquid; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line; Line A/C Suction And Liquid
- Replaces: 55056587AB
- Item Weight: 1.60 Pounds
- Item Dimensions: 3.8 x 6.6 x 40.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55056587AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 6 Cyl 3.8 L GAS

2010 Jeep Wrangler A/C Hose Parts and Q&A

Q: How to Remove the A/C Hose Suction Line on 2010 Jeep Wrangler?
A: Before removing the A/C suction line, disconnect and isolate the negative battery cable. Take out the refrigerant from the refrigerant system. Following that, remove the nut holding the A/C liquid line to the A/C expansion valve and release the A/C liquid line and suction line from the valve. Throw the old O-ring seals away. Should this be necessary, remove the metal retaining bracket that holds the A/C liquid line to the suction line. On 2.8L diesel engines, take the air line off the throttle body and put it aside. After that, take off the nut holding the A/C suction line to the compressor, break the seal between the suction line and the compressor and throw away the O-ring and gasket. Install plugs or tape in the open liquid and suction line fittings as well as the ports on the compressor and expansion valve.