How to Install a New Air Bag for Passengers on 2010 Jeep Wrangler?

Start by turning off the Srs by removing the battery negative cable; wait two minutes for the capacitor to drain before installing the passenger air bag. Do not let anything foreign get into the Passenger air bag (Pab) or trap between it and the door and Never paint the Pab door, as this may prevent deployment. Set the passenger air bag and air bag door together into the opening in the instrument panel base trim. Plug the two ends of the larger, orange connector back into the air bag inflator receptacles so that each end is seated properly. Slide the passenger air bag carefully forward until the upper stud on the windshield fence line connects with the nut and the lower studs seat in their holes in the instrument panel armature. Hold the lower studs with the nuts and then tighten each nut to 6 Nm (55 in. lbs.). Slide the air bag door for the passenger forward and downward until the snap features are completely in the bottom of the trim panel. Fix the grab handle and glove box into their places on the instrument panel. Secure the upper bracket bracket nut to the stud by the windshield with a torque wrench of 6 Nm (55 in. lbs.) and then replace the trim plug into the hole in the top of the instrument panel. The negative cable from the battery should not be connected again until an Srs verification test is carried out after changing any Srs system part.

OEM 2010 Jeep Wrangler Air Bag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bags found

View related parts
2010 Jeep Wrangler Side Impact Inflator Module, Front Driver Side Part Number: 52029335AD
$641.20 MSRP: $934.00
You Save: $292.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbag - Seat; Seat Air Bag, Front Left; Side Air Bag; Air Bag Seat
- Position: Front Driver Side
- Replaces: 52029335AC, 52029335AB
- Item Weight: 2.50 Pounds
- Item Dimensions: 14.6 x 8.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52029335AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2010 Jeep Wrangler Side Impact Inflator Module, Front Passenger Side Part Number: 52029334AD
$641.20 MSRP: $934.00
You Save: $292.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbag - Seat; Seat Air Bag, Front Right; Side Air Bag; Air Bag Seat
- Position: Front Passenger Side
- Replaces: 52029334AB, 52029334AC
- Item Weight: 3.10 Pounds
- Item Dimensions: 15.5 x 8.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52029334AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2010 Jeep Wrangler Driver Air Bag, Driver Side Part Number: 5KC81ZJ8AH
$869.06 MSRP: $1270.00
You Save: $400.94 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbag - Driver; Steering Wheel Air Bag
- Position: Driver Side
- Replaces: 5KC81ZJ8AF, 5KC81ZJ8AG, 5KC81ZJ8AC, 5KC81ZJ8AD, 5KC81ZJ8AE
- Item Weight: 2.50 Pounds
- Item Dimensions: 14.0 x 12.1 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5KC81ZJ8AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- Rubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2010 Jeep Wrangler Driver Inflator Module, Slate Gray, Driver Side Part Number: 5KC81XDVAH
$959.51 MSRP: $1400.00
You Save: $440.49 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbag - Driver; Steering Wheel Air Bag; Driver Air Bag
- Position: Driver Side
- Replaces: 5KC81XDVAE, 5KC81XDVAF, 5KC81XDVAG, 5KC81XDVAD, 5KC81XDVAC
- Item Weight: 3.30 Pounds
- Item Dimensions: 14.0 x 11.7 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5KC81XDVAH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- Rubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2010 Jeep Wrangler Passenger Air Bag, Upper Passenger Side Part Number: 68343458AC
$148.42 MSRP: $219.00
You Save: $70.58 (33%)
Product Specifications
- Other Name: Air Bag - Passenger; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Position: Upper Passenger Side
- Replaces: 52029332AB, 5108734AC, 52029332AC, 68343458AA, 68343458AB, 5108734AD, 52029332AD, 68193006AA, 68193006AB, 68193006AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68343458AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2010 Jeep Wrangler Air Bag Parts and Q&A

Q: How to Install a New Air Bag for Passengers on 2010 Jeep Wrangler?
A: Start by turning off the Srs by removing the battery negative cable; wait two minutes for the capacitor to drain before installing the passenger air bag. Do not let anything foreign get into the Passenger air bag (Pab) or trap between it and the door and Never paint the Pab door, as this may prevent deployment. Set the passenger air bag and air bag door together into the opening in the instrument panel base trim. Plug the two ends of the larger, orange connector back into the air bag inflator receptacles so that each end is seated properly. Slide the passenger air bag carefully forward until the upper stud on the windshield fence line connects with the nut and the lower studs seat in their holes in the instrument panel armature. Hold the lower studs with the nuts and then tighten each nut to 6 Nm (55 in. lbs.). Slide the air bag door for the passenger forward and downward until the snap features are completely in the bottom of the trim panel. Fix the grab handle and glove box into their places on the instrument panel. Secure the upper bracket bracket nut to the stud by the windshield with a torque wrench of 6 Nm (55 in. lbs.) and then replace the trim plug into the hole in the top of the instrument panel. The negative cable from the battery should not be connected again until an Srs verification test is carried out after changing any Srs system part.