First detach and isolate the negative cable from the vehicle's battery and then wait two minutes for the capacitor to empty. It is advisable to cover your hands, eyes and body, as the inside of air bags may contain irritating materials. Pull the trim plug out of the slot in the top of the dash area between the
Windshield and the forward passenger air bag door. From the access hole, release the nut that holds the passenger air bag upper bracket to the stud next to the windshield fence line. After that, take off the handle on top of the
Glove Box door and the glove box too. You will find the two nuts fixing the passenger air bag lower studs to the instrument panel armature in the glove box opening. Push the trim stick or similar device from below, between the rear of the passenger air bag door and the instrument panel, to separate the snap features. Push up the bottom of the passenger air bag door, then pull the air bag toward you to get to the two wires on the air bag inflators. Make sure the wires are disconnected from the air bag inflators by pulling the lock from the connector insulator and then pulling the insulators right out from the inflators. Remove the whole unit consisting of the passenger air bag and air bag door from the instrument panel.