How to Install an Engine Mount for Manual and Automatic Transmissions on 2010 Jeep Wrangler?

Before you install either the manual or automatic transmission engine mount, set the skid plate on the studs and tighten the nuts with a torque wrench to 28 Nm (21 ft. lbs.). After that, put the skid plate bolts into the sill and tighten them to 75 Nm (55 ft. lbs.) of torque. Before connecting the negative cable, take out the transmission support and get the vehicle off the jacks. Following that, put together the transmission mount bracket, connect it to the transmission and tighten the bolts at 54 Nm (40 ft. lbs.) of torque. For the automatic transmission, attach the support cushion to the bracket of the transmission mount and use nuts, tightening them by 41 Nm (30 ft. lbs.). Should the support cushion bracket not be already on the skid plate, place it there and use a torque wrench to tighten each nut to 28 Nm (21 ft. lbs.).

OEM 2010 Jeep Wrangler Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Engine Mounts found

View related parts
2010 Jeep Wrangler Front Mount, Passenger Side Part Number: 52059940AD
$222.07 MSRP: $331.00
You Save: $108.93 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Right; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Insulator; Isolator Engine Mount Left Side; Isolator Engine Mount
- Position: Passenger Side
- Replaces: 52059940AC
- Item Weight: 8.40 Pounds
- Item Dimensions: 5.5 x 6.5 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059940AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS
View related parts
2010 Jeep Wrangler Front Mount, Driver Side Part Number: 52059943AE
$240.20 MSRP: $356.00
You Save: $115.80 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Left; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Insulator; Isolator Engine Mount
- Position: Driver Side
- Replaces: 52059943AD, 52059943AC
- Item Weight: 10.40 Pounds
- Item Dimensions: 7.1 x 7.1 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059943AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS

2010 Jeep Wrangler Engine Mount Parts and Q&A

Q: How to Install an Engine Mount for Manual and Automatic Transmissions on 2010 Jeep Wrangler?
A: Before you install either the manual or automatic transmission engine mount, set the skid plate on the studs and tighten the nuts with a torque wrench to 28 Nm (21 ft. lbs.). After that, put the skid plate bolts into the sill and tighten them to 75 Nm (55 ft. lbs.) of torque. Before connecting the negative cable, take out the transmission support and get the vehicle off the jacks. Following that, put together the transmission mount bracket, connect it to the transmission and tighten the bolts at 54 Nm (40 ft. lbs.) of torque. For the automatic transmission, attach the support cushion to the bracket of the transmission mount and use nuts, tightening them by 41 Nm (30 ft. lbs.). Should the support cushion bracket not be already on the skid plate, place it there and use a torque wrench to tighten each nut to 28 Nm (21 ft. lbs.).