How Does Wheelhouse Assist in Servicing and Repairing the Front Fender Liner on 2010 Jeep Wrangler?

Always raise and support the vehicle to service and repair the front fender liner. After that, you should remove the wheel and tire in order to gain access to the wheel house. Unhook all push/pins, (6), (9) and bolts, (7) and disconnect the wheel speed sensor harness (1) before removing the front wheel house liner from the opening. For the back, unfasten the wheel flare rivets (2) and remove the push pin fasteners (4) so you can take out the splash shield (2). Should they be there, remove the screws to substitute the splash guard.

OEM 2010 Jeep Wrangler Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheelhouses found

View related parts
2010 Jeep Wrangler Wheelhouse Liner, Rear Passenger Side Part Number: 55157126AK
$104.29 MSRP: $155.00
You Save: $50.71 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Right; Fender Splash Shield; Shield Splash Rear
- Position: Rear Passenger Side
- Replaces: 55157126AH, 55157126AD, 55157126AE, 55157126AJ, 55157126AC, 55157126AF, 55157126AG, 55157126AI
- Item Weight: 3.10 Pounds
- Item Dimensions: 46.8 x 25.2 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157126AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2010 Jeep Wrangler Wheelhouse Liner, Rear Driver Side Part Number: 55157127AK
$104.29 MSRP: $155.00
You Save: $50.71 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Left; Fender Splash Shield; Shield Splash Rear
- Position: Rear Driver Side
- Replaces: 55157127AE, 55157127AD, 55157127AH, 55157127AG, 55157127AF, 55157127AI, 55157127AJ, 55157127AC
- Item Weight: 5.30 Pounds
- Item Dimensions: 44.3 x 18.2 x 15.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157127AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2010 Jeep Wrangler Wheelhouse Parts and Q&A

Q: How Does Wheelhouse Assist in Servicing and Repairing the Front Fender Liner on 2010 Jeep Wrangler?
A: Always raise and support the vehicle to service and repair the front fender liner. After that, you should remove the wheel and tire in order to gain access to the wheel house. Unhook all push/pins, (6), (9) and bolts, (7) and disconnect the wheel speed sensor harness (1) before removing the front wheel house liner from the opening. For the back, unfasten the wheel flare rivets (2) and remove the push pin fasteners (4) so you can take out the splash shield (2). Should they be there, remove the screws to substitute the splash guard.