How to Service a Drive Belt on Chrysler 300?

Beforeiredrive belt service, disconnect the negative battery cable from the battery. Loosen the belt tensioner, clockwise, till it touches its stop, lift out the belt and slowly turn it clockwise until it reaches the empty position. As you put on the new belt, inspect every pulley and place the belt properly so no incorrect pump movement overheats the engine. Go around all pulleys with the new belt, except the idler, then move the tensioner arm so it touches its stop, put the belt around the idler and have the tensioner rotate in and fit over all of the pulleys. For new belt installation, the indexing tang should be within 6 - 8 mm (0.24 - 0.32 inch) of the indexing stop on the housing. If you haven't worn a belt for 15 minutes or less, it is still considered new. When the drive belt is installed, take a moment to look at the belt wear indicator.

How to Remove and Replace the Drive Belt on a 2.7L Engine on Chrysler 300?

The automatic spring-loaded tensioner fixes the belt tension, so be sure that tension is maintained before attempting to change the belt on a 2.7L engine. Make sure that all pulleys are working properly, since incorrect movement of the serpentine belt can result in your engine overheating because of a backwards-rotating water pump. While slipping the new belt over every pulley except the idler, move the tensioner arm to the extreme position it is meant to hold it in. After that, place the belt under the idler and let the tensioner rotate and settle onto all the pulleys. When putting in a new belt, the tensioner should have its tang placed between the largest indexing stop on the housing and the indexing tang on its back, representing 6 to 8mm of space. New belts are only ones that have used for 15 minutes or less. Check the wear indicator on the belt as your last step in the installation.

OEM Chrysler 300 Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Drive Belts found

View related parts
Chrysler 300 Serpentine Belt Part Number: 4593684AA
$54.38 MSRP: $73.70
You Save: $19.32 (27%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 4861322AC, 68060352AA, 4892840AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2012 Chrysler 300 | C, C Luxury, Limited, S, Touring | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Serpentine Belt Part Number: 5184647AB
$40.25 MSRP: $57.85
You Save: $17.60 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | Base, C, C Luxury, Limited, S | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler 300 Serpentine Belt Part Number: 4593685AA
$42.58 MSRP: $63.35
You Save: $20.77 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine; Belt
- Replaced by: 4593685AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler 300 | Base, LX, Touring | 6 Cyl 2.7 L GAS
View related parts
Chrysler 300 Serpentine Belt Part Number: 5037542AA
$78.83 MSRP: $118.00
You Save: $39.17 (34%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine; Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | C SRT8, Limited, S, Signature Series, Touring | 6 Cyl 3.5 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Serpentine Belt Part Number: 4892680AA
$59.70 MSRP: $75.68
You Save: $15.98 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler 300 | Base | 6 Cyl 2.7 L GAS
View related parts
Chrysler 300 Serpentine Belt Part Number: 68495977AA
$46.13 MSRP: $62.50
You Save: $16.37 (27%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 53013676AB, 53013676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Chrysler 300 | C, C Luxury, C Platinum, S, SRT8, SRT8 Core | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Serpentine Belt Part Number: 4861928AA
$41.47 MSRP: $59.60
You Save: $18.13 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Chrysler 300 | Base, C, C Luxury, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler 300 Serpentine Belt Part Number: 4627031AA
$33.70 MSRP: $48.45
You Save: $14.75 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler 300 | SRT8, SRT8 Core | 8 Cyl 6.4 L GAS

Chrysler 300 Drive Belt

Choose OEM Drive Belt that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Drive Belt follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Drive Belt in Chrysler 300 works to attach the engine to numerous parts like alternator and A/C compressor among others. Usually, there is use of the serpentine belt that is looped over these parts and connects them to the crankshaft pulley. This design also enhances the power transfer most of the Drive Belts are expected to last for 100000 miles though they require replacement if damaged. For the years of manufacturing Chrysler 300 models, they have used the V-belts and the multi-groove belts as the Drive belt with the merits of each. V-belts provide good gripping action and improved wear resistance while multi-groove belts provide flexibility and high transmission efficiency for multi-step drives. It has been realised that different types of Drive Belt for Chrysler 300 have different levels of efficiency and durability, and so regular service is crucial to enforcing the right type of belt and to prevent further complications of the car's engine.

Chrysler 300 Drive Belt Parts and Q&A

Serpentine Belt
5037542AA
Q: How to Service a Drive Belt on Chrysler 300?
A:
Beforeiredrive belt service, disconnect the negative Battery Cable from the battery. Loosen the Belt Tensioner, clockwise, till it touches its stop, lift out the belt and slowly turn it clockwise until it reaches the empty position. As you put on the new belt, inspect every pulley and place the belt properly so no incorrect pump movement overheats the engine. Go around all pulleys with the new belt, except the idler, then move the tensioner arm so it touches its stop, put the belt around the idler and have the tensioner rotate in and fit over all of the pulleys. For new belt installation, the indexing tang should be within 6 - 8 mm (0.24 - 0.32 inch) of the indexing stop on the housing. If you haven't worn a belt for 15 minutes or less, it is still considered new. When the drive belt is installed, take a moment to look at the belt wear indicator.
Serpentine Belt
4593685AA
Q: How to Remove and Replace the Drive Belt on a 2.7L Engine on Chrysler 300?
A:
The automatic spring-loaded tensioner fixes the belt tension, so be sure that tension is maintained before attempting to change the belt on a 2.7L engine. Make sure that all pulleys are working properly, since incorrect movement of the serpentine belt can result in your engine overheating because of a backwards-rotating Water Pump. While slipping the new belt over every pulley except the idler, move the tensioner arm to the extreme position it is meant to hold it in. After that, place the belt under the idler and let the tensioner rotate and settle onto all the pulleys. When putting in a new belt, the tensioner should have its tang placed between the largest indexing stop on the housing and the indexing tang on its back, representing 6 to 8mm of space. New belts are only ones that have used for 15 minutes or less. Check the wear indicator on the belt as your last step in the installation.