How to Install a Radiator and Ensure Optimal Connections and Fluid Levels on Chrysler 300?

Slide the radiator into the engine compartment, then set the lower rubber isolators into the mounting holes in the radiator support. Attach the radiator mounting bracket and use the bolts provided. Tighten them until they reach 12 Nm (106 in. lbs.). Put the condenser on the radiator and fit the four top bolts, tightening them to 6 Nm (50 in. lbs.). Lift the car up and fit the end of the lower condenser to the frame, then tighten the fasteners to 10 Nm (88 in. lbs.). Set the lower radiator hose (1) and tighten it with the clamp. When you are done, lower the car. Set up the lower radiator hose, making sure it's not too close to anything that may rub, like the belt or the engine itself and clamp it in place to lessen the chance of hitting the hood. Put the upper radiator cover panels into place and attach the negative cable. Top up the coolant in the cooling system, drive the engine until it heats normally and check the fluids in the automatic transmission and cooling system during the operation. If there is ACC (Adaptive Cruise Control), the module requires adjustment.

How to Remove the Radiator from an Engine Cooling System on Chrysler 300?

First, detach the negative battery cable and empty the coolant from the system to remove the engine cooling radiator. After that, take out the upper radiator hose and remove the upper radiator closure panels. After that, disgorge the radiator fan assembly. Lift the car, take out the lower splash guard and then remove the lower radiator hose. Take out the lower condenser mount bolts and drop the car down. After doing this, remove the radiator hose at the top of the engine, using a wrench for the bolts because threadlocker was used on them. Take out the upper radiator holding brackets together with their bolts and do the same for the upper condenser mounting bolts. After finishing, disconnect the condenser assembly from the radiator, plan the radiator so that it hangs toward the engine and take it out of the car.

OEM Chrysler 300 Radiator

Cooling Radiator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Radiators found

View related parts
Chrysler 300 Radiator Part Number: 5137691AA
$226.60 MSRP: $334.00
You Save: $107.40 (33%)
ADD TO CART
Product Specifications
- Other Name: Radiator - Engine Cooling; Radiator Engine Cooling
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler 300 | Base, C, C SRT8, LX, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Radiator Part Number: 5170742AA
$285.52 MSRP: $421.00
You Save: $135.48 (33%)
ADD TO CART
Product Specifications
- Other Name: Radiator - Engine Cooling; Radiator Engine Cooling, 25 Pc Min Qty, Mixture And Match Pallet Program, Order at Mopar.com.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023, 2012-2014, 2005-2007 Chrysler 300 | Base, C, C SRT8, Limited, SRT8, SRT8 Core, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Radiator Part Number: 68050126AB
$419.07 MSRP: $610.00
You Save: $190.93 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator - Engine Cooling; Radiator Engine Cooling, 25 Pc Min Qty, Mixture And Match Pallet Program, Order at Mopar.com.
- Replaces: 68050126AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2023 Chrysler 300 | Base, C, C Luxury, C Platinum, C SRT8, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring, Touring L | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Radiator Part Number: 68050131AA
$437.58 MSRP: $660.00
You Save: $222.42 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator - Engine Cooling; Radiator Engine Cooling, 25 Pc Min Qty, Mixture And Match Pallet Program Only, Order at Mopar.com
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler 300 | C, C SRT8, LX, Limited, S, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Radiator Part Number: 5137692AA
$226.60 MSRP: $334.00
You Save: $107.40 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator - Engine Cooling; Radiator Engine Cooling, 25 Pc Min Qty, Mixture And Match Pallet Program, Order at Mopar.com.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chrysler 300 | Base, C, C SRT8, LX, Limited, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Radiator Part Number: 68050291AA
Product Specifications
- Other Name: Radiator - Engine Cooling; Radiator Engine Cooling, 25 Pc Min Qty, Mixture And Match Pallet Program Only, Order at Mopar.com
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core, Touring | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Radiator Part Number: 5175367AA
Product Specifications
- Other Name: Radiator - Engine Cooling; Radiator Engine Cooling, 25 Pc Min Qty, Mixture And Match Pallet Program, Order at Mopar.com.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Chrysler 300 Radiator

Choose OEM Radiator that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Radiator follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler 300 hail the radiator as a very important part of an automobile since it is responsible for cooling the engine through circulation of liquid coolant between the engine and the radiator. In this process, the coolant circulates in a series of thin tubes in the radiator where the heat is released and this usually made from aluminum to enhance heat exchange. A multi-finned design of the vent is used in order to increase the radiator's exposure area for further contact with the ambient air. There are many possible changes in Chrysler 300 models for some years, one of them relates to the type of radiators, the emphasis made on aluminum cores because of lighter weight and lower cost compared to copper and brass. Some of the mishaps include water leaks that require one to frequently check for such and flush the radiator every year to prevent heating problems that can prove to be very costly. In general, the radiator is one of the crucial systems, which makes the performance of Chrysler 300S effective and dependable.

Chrysler 300 Radiator Parts and Q&A

Radiator
68050131AA
Q: How to Install a Radiator and Ensure Optimal Connections and Fluid Levels on Chrysler 300?
A:
Slide the radiator into the engine compartment, then set the lower rubber isolators into the mounting holes in the Radiator Support. Attach the radiator mounting bracket and use the bolts provided. Tighten them until they reach 12 Nm (106 in. lbs.). Put the condenser on the radiator and fit the four top bolts, tightening them to 6 Nm (50 in. lbs.). Lift the car up and fit the end of the lower condenser to the frame, then tighten the fasteners to 10 Nm (88 in. lbs.). Set the lower radiator hose (1) and tighten it with the clamp. When you are done, lower the car. Set up the lower radiator hose, making sure it's not too close to anything that may rub, like the belt or the engine itself and clamp it in place to lessen the chance of hitting the hood. Put the upper radiator cover panels into place and attach the negative cable. Top up the coolant in the cooling system, drive the engine until it heats normally and check the fluids in the automatic transmission and cooling system during the operation. If there is ACC (Adaptive Cruise Control), the module requires adjustment.
Radiator
68050126AB
Q: How to Remove the Radiator from an Engine Cooling System on Chrysler 300?
A:
First, detach the negative Battery Cable and empty the coolant from the system to remove the engine cooling radiator. After that, take out the upper radiator hose and remove the upper radiator closure panels. After that, disgorge the radiator fan assembly. Lift the car, take out the lower splash guard and then remove the lower radiator hose. Take out the lower condenser mount bolts and drop the car down. After doing this, remove the radiator hose at the top of the engine, using a wrench for the bolts because threadlocker was used on them. Take out the upper radiator holding brackets together with their bolts and do the same for the upper condenser mounting bolts. After finishing, disconnect the condenser assembly from the radiator, plan the radiator so that it hangs toward the engine and take it out of the car.