How to Service and Repair a Starter Motor on a 2.7L Engine on Chrysler 300?

The process begins with removing the negative battery cable from the battery so there is no power running to the starter motor. Hold the wheel using a steering wheel holder and then use the lift's legs to support and keep the vehicle upright. Uninstall the starter assembly and the underbody splash shield. After that, unscrew the intermediate steering shaft center bolt and split the upper and lower shafts. Remove the connection to the battery from the starter and take off the three mounting bolts as well as the wiring clip. Move the starter down and forward, make it go up around the exhaust and past the steering shaft before taking it out of the car.

How to Install a Starter Motor for a 2.7L Engine on Chrysler 300?

For the 2.7L engine, set the starter above the transmission and exhaust and move it over the intermediate shafts up toward the engine. Set the dust shield, with TOP markings, into place with the plastic retainer at the back. Install the dust shield on the engine block and bolt the starter firmly onto it. Tighten the bolts to 54.2 Nm (40 ft. lbs.). Connect the electrical part to the starter, move the notification cock into place with the corresponding cock on the extension and add the intermediate shaft to the extension. Put the shafts side by side and insert the pinch bolt to secure the intermediate shaft to the extension; then tighten it to 43 Nm (32 ft. lbs.). Following that, fit the underbody splash shield, lower the vehicle, take out the steering wheel holder and reattach the negative battery cable.

OEM Chrysler 300 Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Starter motors found

View related parts
Chrysler 300 Starter Part Number: 56029852AB
$326.75 MSRP: $484.00
You Save: $157.25 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 56029852AA, R6029852AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2023 Chrysler 300 | C, C Platinum, Limited, S, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler 300 Starter Part Number: 4801852AB
$324.48 MSRP: $480.00
You Save: $155.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Replaces: RL801852AB, 4801694AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chrysler 300 | Base, C, C Luxury, C Platinum, Limited, S, Touring | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler 300 Starter Part Number: 4608801AC
$247.44 MSRP: $366.00
You Save: $118.56 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 4608801AA, 4608801AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2014 Chrysler 300 | C, C Luxury, C SRT8, S | 5.7L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Starter Bolt Part Number: 5030076AD
$301.03 MSRP: $457.00
You Save: $155.97 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter; Starter Engine
- Replaces: 5030076AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler 300 | C SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Starter Part Number: 68066177AB
$402.69 MSRP: $611.00
You Save: $208.31 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Replaces: 68066177AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Chrysler 300 | SRT8, SRT8 Core | 6.4L V8, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Starter Part Number: 4896464AE
$364.02 MSRP: $552.00
You Save: $187.98 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 4896464AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2023 Chrysler 300 | 5.7L V8
View related parts
Chrysler 300 Starter Part Number: 5035102AB
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 5035102AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023 Chrysler 300 | C | 8 Cyl 6.4 L GAS
- 2015-2018 Chrysler 300 | 6.4L V8

Chrysler 300 Starter Motor

Choose OEM Starter Motor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Starter Motor follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Starter Motor Motor in Chrysler 300's has the direct job of turning electrical energy in the form of current from the battery into mechanical energy to start the engine. This process is launched by an externally magnetised solenoid that is connected to the battery and the starter motor. Instarter, a rotating armature either conducts through field coils or permanent magnets in order to receive required torque to engage the starter drive with the flywheel of the engine. Peculiarly, Chrysler 300 models have incorporated several types of starters, but are dominated by electric starters. Add on starters like gear reduction starters has been developed to improve on efficiency and minimized sizes. In most cases, vehicles are equipped with OE starters which are suitable for standard engines, but for high-performance applications, it is necessary to use high-compression motors starters that are rather different from standard ones because of possible troubles with torque and other parameters.

Chrysler 300 Starter Motor Parts and Q&A

Starter
4608801AC
Q: How to Service and Repair a Starter Motor on a 2.7L Engine on Chrysler 300?
A:
The process begins with removing the negative battery cable from the battery so there is no power running to the starter motor. Hold the wheel using a Steering Wheel holder and then use the lift's legs to support and keep the vehicle upright. Uninstall the starter assembly and the underbody splash shield. After that, unscrew the intermediate steering shaft center bolt and split the upper and lower shafts. Remove the connection to the battery from the starter and take off the three mounting bolts as well as the wiring clip. Move the starter down and forward, make it go up around the exhaust and past the steering shaft before taking it out of the car.
Starter
4896464AE
Q: How to Install a Starter Motor for a 2.7L Engine on Chrysler 300?
A:
For the 2.7L engine, set the starter above the transmission and exhaust and move it over the intermediate shafts up toward the engine. Set the dust shield, with TOP markings, into place with the plastic retainer at the back. Install the dust shield on the engine block and bolt the starter firmly onto it. Tighten the bolts to 54.2 Nm (40 ft. lbs.). Connect the electrical part to the starter, move the notification cock into place with the corresponding cock on the extension and add the intermediate shaft to the extension. Put the shafts side by side and insert the pinch bolt to secure the intermediate shaft to the extension; then tighten it to 43 Nm (32 ft. lbs.). Following that, fit the underbody splash shield, lower the vehicle, take out the steering wheel holder and reattach the negative Battery Cable.