First, slide the roll top shroud over the steering column and use the three shroud mounting screws to hold it in place. To lock a manually tiltable and extendable column, put the handle over the adjustment pin, turn the locking tab to the rear and make sure it clicks into place. You should now set the cluster bezel, then put on the steering column opening reinforcement and finally attach the steering column opening cover next. Now, install the SCCM, as well as all the components taken out to gain access before. Then, join the first battery terminal to the battery, properly calibrate the steering sensor if your car is equipped with ESP and check if the horn, lights and other related features work when operated with the steering column.