How to Service and Repair a Power Steering Hose on Rear-Wheel-Drive on Chrysler 300?

For rear-wheel-drive cars, the pressure hose should be put in place from under the engine, while using a new O-ring on its end. Apply clean power steering oil to the new O-ring on the steering gear part of the hose and fix the pressure hose onto it without tightening the tube nut at present. Place the pressure hose next to the engine cradle on the right, then fit the routing clamp on top of the return hose clamp placed there. Secure both hoses with screw 4. Route the hose past the front of the engine cradle, then place and fasten screw 5 to keep the hose in place. Secure the pressure hose tube bolt at the steering gear until you feel 47 Nm (35 ft. lbs.) of force and then put the belly pan in before you lower the car. Stick another O-ring around the end of the pressure hose and add some clean power steering fluid to it as you reinsert it into the pump connection. Pressure hose should be joined to the pump and the tube fastener should be tightened to 47 Nm (35 ft. lbs.) for 2.7L/3.5L engines. Follow the same instructions for 5.7L/6.1L and on the 3.0L diesel, install the pressure hose to the pump and use a torque wrench to set the tube nut to 47 Nm (35 ft. lbs.). Then, place the air cleaner housing and inlet tube, link the battery negative cable to the battery post, check that there is a good connection and finish by filling and bleeding the power steering system.

How to Install a Power Steering Hose on Chrysler 300?

The first step in installing the power steering line/hose is to connect the reservoir side of hose 3 to the reservoir hose fitting and clamp it in place. Hook supply hose 3 onto the pump and hold it in place with clamp 2 for 2.7L/3.5L engines. On 5.7L/6.1L engines, link supply hose 3 to pump 1 and secure it by clamping it. For the 3.0L diesel engine, link supply hose 3 to pump 1 and hold it in place with clamp 2. After that, install the air cleaner housing and inlet tube. Run the negative cable from the battery rules connector to the battery post so that it is properly inserted. The next step is to put fluid in the power steering system and let it bleed.

OEM Chrysler 300 Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

22 Power Steering Hoses found

View related parts
Chrysler 300 Power Steering Return Hose Part Number: 68217585AA
$80.34 MSRP: $123.00
You Save: $42.66 (35%)
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose; Hose Power Steering Return
- Replaces: 4584563AC, 4584563AE, 4584563AB, 4584563AD, 4584563AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core, Touring | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Power Steering Pressure Hose Part Number: 68043618AD
$97.44 MSRP: $146.00
You Save: $48.56 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Lower Pressure Hose
- Replaces: 68043618AC, 68043618AA, 68043618AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler 300 | C SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Power Steering Pressure Hose Part Number: 4782518AI
$109.27 MSRP: $166.00
You Save: $56.73 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Lower Pressure Hose; Upper Pressure Hose
- Replaces: 4782518AG, 4782518AH, 4782518AE, 4782518AD, 4782518AC, 4782518AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | C, C SRT8, S | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Power Steering Pressure Hose Part Number: 4782363AF
$213.00 MSRP: $317.00
You Save: $104.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Return Hose; Power Steering Hose; Return Hose; Upper Pressure Hose; Lower Return Hose
- Replaces: 4782363AC, 4782363AD, 4782363AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Power Steering Pressure Hose Part Number: 4584560AH
$120.87 MSRP: $267.00
You Save: $146.13 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Return Hose; Hose Power Steering Pressure
- Replaces: 4584560AG, 4584560AF, 4584560AA, 4584560AE, 4584560AC, 4584560AB, 4584560AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Power Steering Pressure Hose Part Number: 4782350AC
$35.72 MSRP: $53.20
You Save: $17.48 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Supply; Power Steering Reservoir Hose; Power Steering Hose; Power Steering Suction Hose; Upper Return Hose; Hose Power Steering Supply Reservoir To Pump; Hose Power Steering Supply
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | C, C SRT8, S | 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Power Steering Pressure Hose Part Number: 4782951AF
$54.64 MSRP: $435.00
You Save: $380.36 (88%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 4782951AB, 4782951AD, 4782951AC, 4782951AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler 300 | Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Power Steering Pressure Hose Part Number: 4782517AH
$102.69 MSRP: $157.00
You Save: $54.31 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Lower Pressure Hose
- Replaces: 4782517AG, 4782517AD, 4782517AF, 4782517AC, 4782517AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Base, LX, Limited, Touring | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Power Steering Pressure Hose Part Number: 68217583AA
$136.03 MSRP: $205.00
You Save: $68.97 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 4584559AE, 4584559AC, 4584559AA, 4584559AD, 4584559AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core, Touring | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Power Steering Return Hose Part Number: 4854545AA
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose; Upper Pressure Hose; Lower Return Hose; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chrysler 300 | C SRT8 | 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Power Steering Suction Hose Part Number: 4782348AC
Product Specifications
- Other Name: Hose - Power Steering Supply; Power Steering Reservoir Hose; Power Steering Hose; Upper Return Hose; Hose Power Steering Supply
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Base, LX, Touring | 6 Cyl 2.7 L GAS
View related parts
Chrysler 300 Power Steering Suction Hose Part Number: 4782349AC
Product Specifications
- Other Name: Hose - Power Steering Supply; Power Steering Reservoir Hose; Power Steering Hose; Upper Return Hose; Hose Power Steering Supply
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Limited, S, Signature Series, Touring | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Power Steering Return Hose Part Number: 68044362AA
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Upper Pressure Hose; Lower Return Hose; Hose Power Steering Return Cooler To Reservoir; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Chrysler 300 | C, C SRT8, Limited, S, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Power Steering Return Hose Part Number: 68217586AA
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose; Hose Power Steering Return
- Replaces: 4584564AE, 4584564AB, 4584564AA, 4584564AD, 4584564AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Power Steering Return Hose Part Number: 4782362AC
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Upper Pressure Hose; Lower Return Hose; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chrysler 300 | Base, C, C SRT8, LX, Limited, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Power Steering Return Hose Part Number: 68041374AD
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Upper Pressure Hose; Lower Return Hose
- Replaces: 68041374AC, 68041374AB, 68041374AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler 300 | C, S | 3.5L V6, 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Power Steering Pressure Hose Part Number: 68040964AD
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 68040964AC, 68040964AB, 68040964AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler 300 | C | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Power Steering Pressure Hose Part Number: 68040961AD
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 68040961AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler 300 | Limited, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Power Steering Pressure Hose Part Number: 5180007AF
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Lower Pressure Hose
- Replaces: 5180007AE, 5180007AA, 5180007AC, 5180007AD, 5180007AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler 300 | Limited, S, Signature Series, Touring | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Power Steering Return Hose Part Number: 4782364AE
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose; Upper Pressure Hose; Lower Return Hose
- Replaces: 4782364AC, 4782364AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler 300 | C, Limited, Touring | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS

| Page 1 of 2 |Next >

1-20 of 22 Results

Chrysler 300 Power Steering Hose

Choose OEM Power Steering Hose that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Power Steering Hose follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

An important part which improves the steering system, the Chrysler 300 power steering hose is crucial to improving the performance of your car. This important hose is the connection between the power steering pump and the steering gear where the flow of pressurized hydraulic fluid takes place thus enabling easy and smooth turning of the steering. Featuring the highly long lasting material, the Chrysler 300 Power Steering Hose guarantees the safe control of the vehicle. Being present in the base, Touring, Limited, as well as the 300C and SRT-8 models, touches upon the model's relevance for the Chrysler 300 line. A properly working Power Steering Hose is vital in improving the efficiency and safety of your car; when this hose is faulty you will realize that the steering becomes very heavy and in addition to that there will be possible damage to the hydraulic pump; it is therefore very important that sometimes you have to check on the hose to ensure it is properly working. The Chrysler 300 Power Steering Hose differs from other car products because of it special construction and design that corresponds to the aggressive driving style and not only. Besides improving the feel of the steering and thus the actual driving feel, this Power Steering Hose plays a role in the overal safety of the car as fluid delivery is guaranteed. All in all, it can be concluded that the Chrysler 300 Power Steering Hose is a beneficial product for Chrysler 300 as it successfully unites reliability, performance, and safety as one component.

Chrysler 300 Power Steering Hose Parts and Q&A

Power Steering Pressure Hose
4782350AC
Q: How to Service and Repair a Power Steering Hose on Rear-Wheel-Drive on Chrysler 300?
A:
For rear-wheel-drive cars, the pressure hose should be put in place from under the engine, while using a new O-ring on its end. Apply clean power steering oil to the new O-ring on the steering gear part of the hose and fix the pressure hose onto it without tightening the tube nut at present. Place the pressure hose next to the engine cradle on the right, then fit the routing clamp on top of the return hose clamp placed there. Secure both hoses with screw 4. Route the hose past the front of the engine cradle, then place and fasten screw 5 to keep the hose in place. Secure the pressure hose tube bolt at the steering gear until you feel 47 Nm (35 ft. lbs.) of force and then put the belly pan in before you lower the car. Stick another O-ring around the end of the pressure hose and add some clean power steering fluid to it as you reinsert it into the pump connection. Pressure hose should be joined to the pump and the tube fastener should be tightened to 47 Nm (35 ft. lbs.) for 2.7L/3.5L engines. Follow the same instructions for 5.7L/6.1L and on the 3.0L diesel, install the pressure hose to the pump and use a torque wrench to set the tube nut to 47 Nm (35 ft. lbs.). Then, place the air cleaner housing and inlet tube, link the battery negative cable to the battery post, check that there is a good connection and finish by filling and bleeding the power steering system.
Power Steering Pressure Hose
4782518AI
Q: How to Install a Power Steering Hose on Chrysler 300?
A:
The first step in installing the power steering line/hose is to connect the reservoir side of hose 3 to the reservoir hose fitting and clamp it in place. Hook supply hose 3 onto the pump and hold it in place with clamp 2 for 2.7L/3.5L engines. On 5.7L/6.1L engines, link supply hose 3 to pump 1 and secure it by clamping it. For the 3.0L diesel engine, link supply hose 3 to pump 1 and hold it in place with clamp 2. After that, install the air cleaner housing and inlet tube. Run the negative cable from the battery rules connector to the battery post so that it is properly inserted. The next step is to put fluid in the power steering system and let it bleed.