How to Effectively Service and Repair an EGR Valve on Chrysler 300M?

Firsttake out the negative battery cable and then disconnect the air inlet tube and resonator. After that, unplug the electrical connector from the EGR valve and take out the mounting screws at the EGR valve, found at the rear of the right cylinder head. With the old EGR valve out, take out the screws from the mount, clean the gasket surfaces, throw away the damaged gasket and clean the passages inside the EGR too if needed. Install the EGR valve and gasket on the cylinder head only so you can remove them before tightening fasteners. Oil filter should be held in the middle, with EGR valve to cylinder head screws tightened to 31 Nm (275 in. lbs.) and EGR tube to EGR valve screws tightened to 11 Nm (95 in. lbs.) torque. Once more, slip the cap onto the electrical connector and attach it to the solenoid. Then, put in the air inlet tube and resonator and place the other end of the battery cable on the negative battery post.

OEM Chrysler 300M EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 EGR Valves found

View related parts
Chrysler 300M EGR Valve Part Number: 5145611AA
$243.10 MSRP: $369.00
You Save: $125.90 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: EGR Kit - EGR; Exhaust Gas Recirculation (EGR) Valve; Exhaust Gas Recirculation (EGR) Tube; Tube
- Replaces: 4591092AB, 4591815AB, 4591815AC, 4591815AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2002 Chrysler 300M | Base, Special | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M EGR Valve Part Number: 5145611AB
Product Specifications
- Other Name: EGR Kit - EGR; EGR Tube
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2002 Chrysler 300M | Base, Special | 6 Cyl 3.5 L GAS

Chrysler 300M EGR Valve

Choose OEM EGR Valve that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each EGR Valve follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300M matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300M parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

It must be said that the EGR Valve is one of the most important components that define the car's dependability and effectiveness. It is an instrumental valve that enables the regulation of exhaust gases that might find their way back into the combustion chamber and, thus, assist in curbing air pollution when the air-fuel mixture is substandard. The EGR Valve also help in the reducing of combustion temperature of exhaust gases and nitrogen oxide (NOx) emission hence enhances the Chrylser 300M fuel efficiency and safety. This technology has over the years developed with the currently used EGR Valves in the Chrysler 300M utilizing highly complex mechanisms that are able to respond to a variety of conditions of the engine and its load. The provision of compatibility for a range of 300M models, 300M Special and Pro- Am to highlight a few shows that the EGR Valve is useful as it provides a Chrysler 300M line. Specificity like backpressure transducers make it easier to fine-tune the exhaust systems thus increasing the efficiency of the car. EGR Valve not only maintains the emissions requirements but also benefits the long life durability of the crank case engine because it helps in preventing the formation of carbon particles within the engines which causes the engine's performance to be impaired. In general, the EGR Valve is one more company's product that is known for its reliability, efficiency and having great importance for maintaining the efficiency and safety of Chrysler 300M.

Chrysler 300M EGR Valve Parts and Q&A

EGR Valve
5145611AA
Q: How to Effectively Service and Repair an EGR Valve on Chrysler 300M?
A:
Firsttake out the negative Battery Cable and then disconnect the air inlet tube and resonator. After that, unplug the electrical connector from the EGR valve and take out the mounting screws at the EGR valve, found at the rear of the right cylinder head. With the old EGR valve out, take out the screws from the mount, clean the gasket surfaces, throw away the damaged gasket and clean the passages inside the EGR too if needed. Install the EGR valve and gasket on the cylinder head only so you can remove them before tightening fasteners. Oil filter should be held in the middle, with EGR valve to cylinder head screws tightened to 31 Nm (275 in. lbs.) and EGR Tube to EGR valve screws tightened to 11 Nm (95 in. lbs.) torque. Once more, slip the cap onto the electrical connector and attach it to the solenoid. Then, put in the air inlet tube and resonator and place the other end of the battery cable on the negative battery post.