How to Remove and Repair an Engine Mount on Chrysler Aspen?

The engine mount should be serviced and repaired using a hoist to lift the vehicle and a jack under the transmission. For both manual and 4x2 automatic, detach the nut at the insulator mount with the bolt first and for 4x4 automatic, unbolt the four retainers. Remove the through bolt next, for manual and 4x2 automatic transmissions, then continue to raise the transmission to remove the bolts retaining the mount to the crossmember for 4x4 automatic ones. Remove the nuts at the crossmember that keep the isolator in place and then remove the bolts joining the insulator to the transmission-for manual transmissions, two and for 4x2 automatic transmissions, three.

What Are the Installation Steps and Torque Specifications for Engine Mounts Across Various Transmission Types on Chrysler Aspen?

Reinstalling the engine mount is the same as removing it in reverse order. Turn the nut retaining the through bolt until it reaches 101 Nm (75 ft. lbs.) of torque. For manual transmission and 4x2 automatic transmission, both the isolator bracket to transmission retaining bolts and the isolator mount to crossmember retaining nuts should be torque set to 68 Nm (50 ft. lbs.) and 41 Nm (30 ft. lbs.), respectively. When fitting, tighten the mount bolts to the transmission to 68 Nm (50 ft. ft.) and the mount bracket to the crossmember just below to 28 Nm (250 in. lbs.).

OEM Chrysler Aspen Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Engine Mounts found

View related parts
Chrysler Aspen Front Mount, Driver Side Part Number: 52855843AD
$48.54 MSRP: $98.50
You Save: $49.96 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Front Left; Engine Mount Bracket; Motor Mount; Front Insulator; Mount; Insulator Engine Mount
- Position: Front Driver Side
- Replaces: 52855843AB, 52855843AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Mount Bracket, Front Part Number: 52021709AB
$16.67 MSRP: $23.95
You Save: $7.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket; Engine Mount, Front; Motor Mount; Valve Grind Gasket Kit; Lower Gasket Kit; Front Insulator; Bracket Engine Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Front Mount, Passenger Side Part Number: 52855588AD
$48.72 MSRP: $67.85
You Save: $19.13 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Front Right; Engine Mount Bracket; Motor Mount; Front Insulator; Mount; Insulator Engine Mount
- Position: Front Passenger Side
- Replaces: 52855588AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Mount Bracket, Passenger Side Part Number: 52021636AB
$23.47 MSRP: $29.75
You Save: $6.28 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front Right, Right; Motor Mount; Front Bracket; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 52021636AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Mount Bracket, Passenger Side Part Number: 52021638AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front Right, Right; Motor Mount; Front Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Front Mount Part Number: 68417512AB
$206.21 MSRP: $304.00
You Save: $97.79 (33%)
Product Specifications
- Other Name: Gasket Kit - Engine; Valve Grind Gasket Kit; Overhaul Gasket Set
- Replaces: 68196239AC, 68196239AA, 68196239AB, 68417512AA, 68046260AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited, Limited Hybrid | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Mount Bracket, Front Driver Side Part Number: 52021639AB
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front Left, Left; Motor Mount; Front Bracket; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Front Driver Side
- Replaces: 52021639AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Front Mount, Driver Side Part Number: 52855589AD
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Front Left; Engine Mount Bracket; Motor Mount; Front Insulator; Mount; Insulator Engine Mount
- Position: Front Driver Side
- Replaces: 52855589AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Mount Bracket, Front Driver Side Part Number: 52122775AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front Left, Left; Motor Mount; Front Bracket; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Front Driver Side
- Replaces: 52021637AB, 52021637AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Mount Bracket, Front Part Number: 52021629AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front, Right; Motor Mount; Engine Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Front Mount, Passenger Side Part Number: 52855540AE
Product Specifications
- Other Name: Insulator - Engine Mount; Front Right Torque Strut; Mount Bracket; Motor Mount; Rear Insulator; Front Insulator; Mount Insulator; Mount; Insulator Engine Mount
- Position: Passenger Side
- Replaces: 52855540AD, 52855540AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Front Mount, Driver Side Part Number: 52855539AE
Product Specifications
- Other Name: Insulator - Engine Mount; Front Left Torque Strut Bracket; Motor Mount; Front Insulator; Mount Insulator; Mount; Insulator Engine Mount
- Position: Driver Side
- Replaces: 52855539AC, 52855539AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Chrysler Aspen Engine Mount

Choose OEM Engine Mount that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A car engine is one of the most sensitive and vital parts of a car and therefore deserves the same treatment and effort in its production as the Chrysler Aspen Engine Mount is; a hallmark in the Chrysler Aspen cars. Made to minimize noises and shocks and to properly fix the location of engine and transaxle, the Engine Mount is one of the elements that contribute to better driving experience and improved safety. This Engine Mount is a suitable part for Chrysler Aspen produced in 2006, 2007, and 2008 as it stabilizes the engine and safeguards it from shaking and affecting other parts. Chrysler Aspen Engine Mounts come in styles consisting of rubber, fluid filled hydraulic and the more superior info based active ones. The conventional ones give good structural support, and the hydro mounts allow for the attenuation of more structural vibrations than the conventional mounts; and the active ones adjust the stiffness relative to the engine rpm for the optimal performance. These and many other benefits in responsiveness do not only give the Chrysler Aspen a boost in efficiency but also provide for that much needed solid and smooth ride for consumers in the auto market. Furthermore the Chrysler Aspen Engine Mount is considered as a long lasting and durable part due to the stress that it receives on the roads today. Starting with the powerful towing ability, moving to the spaciousness of the interior, smooth control and safety that the Chrysler Aspen with the Engine Mount provides, makes the car the favorite for both families and explorers.

Chrysler Aspen Engine Mount Parts and Q&A

Mount Bracket, Passenger Side
52021638AA
Q: How to Remove and Repair an Engine Mount on Chrysler Aspen?
A:
The engine mount should be serviced and repaired using a hoist to lift the vehicle and a jack under the transmission. For both manual and 4x2 automatic, detach the nut at the insulator mount with the bolt first and for 4x4 automatic, unbolt the four retainers. Remove the through bolt next, for manual and 4x2 automatic transmissions, then continue to raise the transmission to remove the bolts retaining the mount to the crossmember for 4x4 automatic ones. Remove the nuts at the crossmember that keep the isolator in place and then remove the bolts joining the insulator to the transmission-for manual transmissions, two and for 4x2 automatic transmissions, three.
Mount Bracket, Passenger Side
52021636AB
Q: What Are the Installation Steps and Torque Specifications for Engine Mounts Across Various Transmission Types on Chrysler Aspen?
A:
Reinstalling the engine mount is the same as removing it in reverse order. Turn the nut retaining the through bolt until it reaches 101 Nm (75 ft. lbs.) of torque. For manual transmission and 4x2 automatic transmission, both the isolator bracket to transmission retaining bolts and the isolator mount to crossmember retaining nuts should be torque set to 68 Nm (50 ft. lbs.) and 41 Nm (30 ft. lbs.), respectively. When fitting, tighten the mount bolts to the transmission to 68 Nm (50 ft. ft.) and the mount bracket to the crossmember just below to 28 Nm (250 in. lbs.).